Enlarge Image
Email a friend
Bookmark this page
Printable Version
Prop 65 Info (CA Residents)
|
SAVE UP TO $95
12-Piece General Purpose Router Bit Sets
(0 Customer Reviews - Write One Today)
Everyone asks the same question: "What bits do I really need to get started?" When you shop and compare, you'll find that most competitors sets all look the same with the same selection of bits. These sets may look like a good value until you realize that you will probably never use up to half of them. So much for value. At Eagle, we listened to our customer's comments and requests and have put together our own money-saving sets based upon what you, our customers have told us you really want! The result...sets that are usable in numerous applications, not just sitting in a drawer collecting dust. This set is your most economical way to buy the most popular bits. Top quality bits at a substantial savings... Now that's value! All bits are Made in the USA 1/4" Shank Router Bit Set (100-1222) Includes:- 102-0442, STRAIGHT, 1/4" X 3/4"
- 102-0832, STRAIGHT, 1/2" X 1"
- 102-1222, STRAIGHT, 3/4" X 1"
- 117-0822, FLUSH TRIM, 1/2" X 1"
- 130-0602, ROUND NOSE, 3/8" X 1/2 "
- 132-0822, V-GROOVE,90 DEGREE,1/2"
- 134-0802, DOVETAIL,1 /2" X 14 DEGREE
- 150-0812, RABBET, 1/2" X 1/2"
- 152-0612, CHAMFER, 45 DEGREE, 5/8"
- 154-0602, COVE, 3/8" RADIUS
- 156-0602, ROUNDOVER, 3/8" RADIUS
- 169-0302, ROMAN OGEE, 5/32" RADIUS
- 499-5731, ROUTER BIT STORAGE CASE
1/2" Shank Router Bit Set (100-1225) Includes:- 102-0455, STRAIGHT, 1/4" X 3/4""
- 102-0845, STRAIGHT, 1/2" X 1"
- 102-1225, STRAIGHT, 3/4" X 1"
- 117-0825, FLUSH TRIM, 1/2" X 1"
- 130-0605, ROUND NOSE, 3/8" X 1"
- 132-0815, V-GROOVE, 90 DEGREE
- 134-0805, DOVETAIL, 1/2" X 14 DEGREE
- 150-0815, RABBET, 1/2" X 1/2 "
- 152-0625, CHAMFER, 45 DEGREE, 5/8"
- 154-0605, COVE, 3/8" RADIUS
- 156-0605, ROUNDOVER, 3/8" RADIUS
- 169-0305, ROMAN OGEE, 5/32" RADIUS
- 499-5731, ROUTER BIT STORAGE CASE
There are currently no customer reviews for this product. If you have used this product before, please click here and tell everyone about it.
Write your own review
Router Saftey Chart - Suggested Speeds: | Bit Diameter | Max Speed | | up to 1" | 24000 RPM | | 1-1/16" to 2" | 18000 RPM | | 2-1/16" to 2-1/2" | 16000 RPM | | 2-9/16" to 3" | 14500 RPM | | over 3" | 12000 RPM | Router Saftey Tips: - Always wear eye and ear protection.
- Always use properly sharpened bits.
- Never use bits that are dull or damaged.
- Shank must be completely inserted into collet and then backed-off approximately 1/16".
- Don't "bottom-out" bit in collet.
- Never partially insert bit into collet. Tighten securely and recheck periodically for possible slippage or "run-out" due to wear.
- Keep collet clean and replace if worn.
- Never start the router with the bit in contact with wood.
- Always feed your work in the proper direction against the bit rotation.
- Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
- Do not face tool's discharge when operating.
- Always unplug router when changing bits or making adjustments.
- Use a router table and fence whenever possible.
- Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
- Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
- The bigger the bit, the lower RPM recommended (see chart).
|
|