The most versatile rabbet kits ever at tremendous savings. Our rabbet bits with extra thick carbide feature cutting lengths from 1/2" up to 1". With up to 10 bearings, you will be able to cut any type of rabbet you need and flush trim too! (See chart for details). Kits include a two flute, carbide tipped rabbet bit, plus extra bearing guides and allen key for bearing changes. USA

Click here for Rabbet Cutting Depth Conversions Chart PDF.

brand - click here
What's the difference?

(1 Customer Review)    Write your own review

---

Product Rating:     Date Posted: 2011-07-18 23:11:06

U.S.A. quality

Posted By: Jerry Knowles

Location: Auburndale, FL United States

Comments: Great quality bit nice to buy made in America tools you can't ask for better. Should come with warnings about how sharp they are. They don't make'em like this in China.

Product Instructions:

Cutting Depth Conversions

Router Safety Chart - Suggested Speeds:

Bit Diameter	Max Speed
up to 1"	24000 RPM
1-1/16" to 2"	18000 RPM
2-1/16" to 2-1/2"	16000 RPM
2-9/16" to 3"	14500 RPM
over 3"	12000 RPM

Router Safety Tips:

• Always wear eye and ear protection.
• Always use properly sharpened bits.
• Never use bits that are dull or damaged.
• Shank must be completely inserted into collet and then backed-off approximately 1/16".
• Don't "bottom-out" bit in collet.
• Never partially insert bit into collet. Tighten securely and recheck periodically for possible slippage or "run-out" due to wear.
• Keep collet clean and replace if worn.
• Never start the router with the bit in contact with wood.
• Always feed your work in the proper direction against the bit rotation.
• Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
• Do not face tool's discharge when operating.
• Always unplug router when changing bits or making adjustments.
• Use a router table and fence whenever possible.
• Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
• Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
• The bigger the bit, the lower RPM recommended (see chart).