These are the bits you can count on for smooth, burn free cutting. Great for pattern and template routing. Precision ground, extra thick carbide with a top quality ball bearing pilot for longer tool life.The down shear action prevents tear-out and chipped surfaces. Try our three flute bits for an even far superior finish. All bits carbide tipped with bearing guide. USA

NOTE:
•For offset pattern and trim cuts, order larger bearings.
•Use 117-1305 for joinery applications

BIT TYPES:
A = Single bottom bearing
B = Double bottom bearing
C = Top and bottom bearing
D = With down shear cutting angles

brand - click here
What's the difference?

(1 Customer Review)    Write your own review

---

Product Rating:     Date Posted: 2008-02-25 00:00:00

Router Bits

Posted By: Pete Tonsich

Location: Cerritos, CA United States

Comments: I have tried the router bit and it works very well. I am very pleased with the product and then bought the full set of 24 router bits.

Router Saftey Chart - Suggested Speeds:

Bit Diameter	Max Speed
up to 1"	24000 RPM
1-1/16" to 2"	18000 RPM
2-1/16" to 2-1/2"	16000 RPM
2-9/16" to 3"	14500 RPM
over 3"	12000 RPM

Router Saftey Tips:

• Always wear eye and ear protection.
• Always use properly sharpened bits.
• Never use bits that are dull or damaged.
• Shank must be completely inserted into collet and then backed-off approximately 1/16".
• Don't "bottom-out" bit in collet.
• Never partially insert bit into collet. Tighten securely and recheck periodically for possible slippage or "run-out" due to wear.
• Keep collet clean and replace if worn.
• Never start the router with the bit in contact with wood.
• Always feed your work in the proper direction against the bit rotation.
• Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
• Do not face tool's discharge when operating.
• Always unplug router when changing bits or making adjustments.
• Use a router table and fence whenever possible.
• Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
• Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
• The bigger the bit, the lower RPM recommended (see chart).