Simple adjustments to the cutting depth will give you a variety of eye catching beads, veins, edges and roundovers. Use for making decorative cabinet panel doors and drawer fronts. Great for sign making. Give a bold accent to large furniture pieces. Also available with top mounted bearing for template routing. All bits two flute, carbide tipped. USANOTE:
• Part numbers ending with B
feature top mounted bearing.
•139-0602B supplied without collar
•139-0202, 139-0402 are solid carbideEXTRA SAVINGS!
When you buy a 5 Piece Value Set below.
-1/4" shank includes: 1/16", 1/8", 3/16", 1/4", 3/8" radius
-1/4 & 1/2" shank includes: 1/16", 1/8", 3/16", 1/4", 3/8" radius brand - click hereWhat's the difference?
Router Saftey Chart - Suggested Speeds:
up to 1"
1-1/16" to 2"
2-1/16" to 2-1/2"
2-9/16" to 3"
Router Saftey Tips:
- Always wear eye and ear protection.
- Always use properly sharpened bits.
- Never use bits that are dull or damaged.
- Shank must be completely inserted into collet and then backed-off approximately 1/16".
- Don't "bottom-out" bit in collet.
- Never partially insert bit into collet. Tighten securely and recheck periodically for possible slippage or "run-out" due to wear.
- Keep collet clean and replace if worn.
- Never start the router with the bit in contact with wood.
- Always feed your work in the proper direction against the bit rotation.
- Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
- Do not face tool's discharge when operating.
- Always unplug router when changing bits or making adjustments.
- Use a router table and fence whenever possible.
- Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
- Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
- The bigger the bit, the lower RPM recommended (see chart).