Give your windows that classics eparated window pane look. First select our special "V" Groove bit (A). When used with any 1/4" diameter straight bit you will be able to produce the matching interlocking joint. Bits can also be used to make interlocking face frame joints. Finish off the edges with either of our specially designed colonial accent bits (B or D). Making the entire window? Use our matching rail bit profiles to enable you to cope your muntins to the mullion window frame (C or E). All bits are two flute, carbide tipped. Instructions included. USA

MULLION VALUE PACKAGES 3-Piece, 5/32" Radius Mullion Set - 1/4" Shank (#199-5802) Set includes the following bits ...
Profile	SKU#	Description
A	179-3312	Mullion V-Groove
B	179-5812	Mullion Stile, 5/32" Radius
C	179-5832	Mullion Rail, 5/32" Radius
3-Piece, 5/32" Radius Mullion Set - 1/2" Shank (#199-5805) Set includes the following bits ...
Profile	SKU#	Description
A	179-3315	Mullion V-Groove
B	179-5815	Mullion Stile, 5/32" Radius
C	179-5835	Mullion Rail, 5/32" Radius
3-Piece, 3/16" Radius Mullion Set - 1/4" Shank (#199-5812) Set includes the following bits ...
Profile	SKU#	Description
A	179-3312	Mullion V-Groove
D	179-5822	Mullion Stile, 3/16" Radius
E	179-5842	Mullion Rail, 3/16" Radius
3-Piece, 3/16" Radius Mullion Set - 1/2" Shank (#199-5815) Set includes the following bits ...
Profile	SKU#	Description
A	179-3315	Mullion V-Groove
D	179-5825	Mullion Stile, 3/16" Radius
E	179-5845	Mullion Rail, 3/16" Radius

brand - click here
What's the difference?

There are currently no customer reviews for this product. If you have used this product before, please click here and tell everyone about it.

Write your own review

Product Instructions:

Mullion Bar Bits

Router Saftey Chart - Suggested Speeds:

Bit Diameter	Max Speed
up to 1"	24000 RPM
1-1/16" to 2"	18000 RPM
2-1/16" to 2-1/2"	16000 RPM
2-9/16" to 3"	14500 RPM
over 3"	12000 RPM

Router Saftey Tips:

• Always wear eye and ear protection.
• Always use properly sharpened bits.
• Never use bits that are dull or damaged.
• Shank must be completely inserted into collet and then backed-off approximately 1/16".
• Don't "bottom-out" bit in collet.
• Never partially insert bit into collet. Tighten securely and recheck periodically for possible slippage or "run-out" due to wear.
• Keep collet clean and replace if worn.
• Never start the router with the bit in contact with wood.
• Always feed your work in the proper direction against the bit rotation.
• Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
• Do not face tool's discharge when operating.
• Always unplug router when changing bits or making adjustments.
• Use a router table and fence whenever possible.
• Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
• Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
• The bigger the bit, the lower RPM recommended (see chart).