Convert your regular bits into pattern cutting bits with our top mounting stainless bearing kits. Just slip the bearing and stop collar on over the shank and lock in place. Now you're ready to follow any template or pattern.

Kits include: Bearing, stop collar with set screw and hex key.

(1 Customer Review)    Write your own review

---

Product Rating:     Date Posted: 2008-03-05 00:00:00

Great Experience

Posted By: James Davis

Location: Kelso, WA United States

Comments: I've only been dealing with them for a year or so now, but I can say for certain that I'll be dealing with them for a long time. I'm very pleased (and surprised) with the speed at which I receive my orders. The prices and quality of their products are nice too!

Router Saftey Chart - Suggested Speeds:

Bit Diameter	Max Speed
up to 1"	24000 RPM
1-1/16" to 2"	18000 RPM
2-1/16" to 2-1/2"	16000 RPM
2-9/16" to 3"	14500 RPM
over 3"	12000 RPM

Router Saftey Tips:

• Always wear eye and ear protection.
• Always use properly sharpened bits.
• Never use bits that are dull or damaged.
• Shank must be completely inserted into collet and then backed-off approximately 1/16".
• Don't "bottom-out" bit in collet.
• Never partially insert bit into collet. Tighten securely and recheck periodically for possible slippage or "run-out" due to wear.
• Keep collet clean and replace if worn.
• Never start the router with the bit in contact with wood.
• Always feed your work in the proper direction against the bit rotation.
• Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
• Do not face tool's discharge when operating.
• Always unplug router when changing bits or making adjustments.
• Use a router table and fence whenever possible.
• Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
• Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
• The bigger the bit, the lower RPM recommended (see chart).