The Mach Vacuum Systems are great time savers for the professional and hobbyist alike. Simply attach your shop vac to the 1 1/2" tapered port and you're ready for clamp free working with most any hand held power tool. The system works using a series of valves and gaskets. When you set a work piece on the valves it pushes the ball bearing down, opening the airflow and allowing the shop vac's suction to hold the material in place. The gasket is a rubber seal that surrounds the valve. When the valve is opened the gasket forms a vacuum which holds the work piece in place, providing solid holding power for pieces from 3-3/4" x 3-3/4" to 48" x 48".

U-Mach Kit- Includes 12 ball valves, 1 vacuum control tap plate with screws, 1 vacuum control tap and locking nut, 1 vented hose adapter (1-1/2"), 15' top gasket material, 7-1/2' bottom gasket material, comprehensive instruction manual.

Big-Mach Kit- Includes 21 ball valves, 1 vacuum control tap plate with screws, 1 vacuum control tap and locking nut, 1 control tap plate gasket, 1 vented hose adapter (1-1/2"), 15' bottom gasket material, 30' top gasket material.

Gaskets- Re-configure the layout of your vacuum table to your needs. Decrease the size of vacuum cells to hold smaller pieces or replace any worn gaskets. Sizes below show height x width x length.

NOTE: Construction materials not included.

There are currently no customer reviews for this product. If you have used this product before, please click here and tell everyone about it.

Write your own review