With this Forrest Woodworker II all purpose blades you can rip and crosscut 1" to 2" hardwood and softwood with results that have a smooth as sanded surface. Ply-veneers of oak and birch will crosscut with no bottom splintering at moderate feed rates.

Features:

• 20° Face Hook for easy feed
• Double hard and 40% stronger C-4 carbidel gives you up to 300% longer life between sharpenings
• Reduces the need to change blades (rips, combo, and crosscuts)
• Ends scratchy saw cuts
• Ends second-step finishing (jointing and sanding not required)
• Ends cutting 1/16" oversize to allow for resurfacing.
• Buy and sharpen one blade instead of 3

Use the 30 tooth Woodworker II for ripping mostly 2" - 3" thick hardwoods. Side wobble is held to .001" with other brands of blades .004/.010 is common!

Raise the blade for thick woods and lower the blade for thin woods and get perfect cuts every time.

Specially engineered clearances on the carbide teeth can totally eliminate side scoring. The result...no planing/jointing or sanding. In many cases a glue-line cut can be obtained, depending on the accuracy of the saw machine.

And optional thin-kerf 3/32" width blade is available in 10" diameter for easier cutting with minimum power saws. This blade also remove 25% less material.

(1 Customer Review)    Write your own review

---

Product Rating:     Date Posted: 2010-07-31 11:49:12

The best there is.....

Posted By: T. A. Zane

Location: Pinetop, AZ United States

Comments: No matter what brand table saw you have the final results you get are due to the blade you have installed. Forrest blades are the finest saw blade you can buy.This blade cuts like no other. Excellent results in plywood,soft or hard wood. I am amazed at the results I get every time I make a cut with this blade. It can be resharpened by sending it back to Forrest as well. You can't go wrong with Forrest blades.