| Use scroll bar to view additional images |
Enlarge Image
Email a friend
Bookmark this page
Printable Version
Prop 65 Info (CA Residents)
|
SAVE UP TO 48%
Rabbet Kits
Get up to 10 cuts with just one bit!
(0 Customer Reviews - Write One Today)
The most versatile rabbet kits ever at tremendous savings. Our rabbet bits with extra thick carbide feature cutting lengths from 1/2" up to 1" and with up to 10 bearings, you will be able to cut any type of rabbet you will need and flush trim too! See chart for details. Kits include a two flute, carbide tipped rabbet bit with anti-kickback design, plus extra bearing guides and allen key for bearing changes. Click here for Rabbet Cutting Depth Conversions Chart PDF.
brand - click here What's the difference?
There are currently no customer reviews for this product. If you have used this product before, please click here and tell everyone about it.
Write your own review
Router Saftey Chart - Suggested Speeds: | Bit Diameter | Max Speed | | up to 1" | 24000 RPM | | 1-1/16" to 2" | 18000 RPM | | 2-1/16" to 2-1/2" | 16000 RPM | | 2-9/16" to 3" | 14500 RPM | | over 3" | 12000 RPM | Router Saftey Tips: - Always wear eye and ear protection.
- Always use properly sharpened bits.
- Never use bits that are dull or damaged.
- Shank must be completely inserted into collet and then backed-off approximately 1/16".
- Don't "bottom-out" bit in collet.
- Never partially insert bit into collet. Tighten securely and recheck periodically for possible slippage or "run-out" due to wear.
- Keep collet clean and replace if worn.
- Never start the router with the bit in contact with wood.
- Always feed your work in the proper direction against the bit rotation.
- Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
- Do not face tool's discharge when operating.
- Always unplug router when changing bits or making adjustments.
- Use a router table and fence whenever possible.
- Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
- Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
- The bigger the bit, the lower RPM recommended (see chart).
|
|