Enlarge Image
Email a friend
Bookmark this page
Printable Version
Prop 65 Info (CA Residents)
|
SAVE OVER 85%
70-Piece Master Bit Sets
Incredible value, JUST $3.57 per bit!
(5 Customer Reviews)
This is the largest, most comprehensive carbide tipped router bit set that we have ever offered and at an amazingly low price with a savings of 80% off the individual prices! These sets include just about every bit you'll ever need and there is not a dog in the bunch. All bits are carbide tipped and feature safety anti-kickback designs. Included is the handsome wall hanging wood chest which measures 15-3/8" W x 23-1/4" H x 2-5/8"D and features tilting bit racks for easy access and clearly labels every bit for your convenience. 70-Piece Set Includes: - 7 Standard Straights: 1/4", 5/16", 3/8", 7/16", 1/2", 3/4", 1"
- 3 Plywood Dado Straights: 7/32", 31/64", 23/32"
- 6 Roundovers: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" Radius
- 6 Coves: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" Radius
- 6 Dovetails: 7° x 5/8", 7-1/2° x 1/4", 9° x 3/8", 14° - 1/2", 5/8", 3/4"
- 5 V-Grooves: 60° x 1/2, 90° x 3/8", 1/2", 5/8", 3/4"
- 4 Chamfering Bits: 15°, 22-1/2°, 30°, 45°
- 4 Round Nose Bits: 1/4", 3/8", 1/2", 3/4"
- 2 Square Edge Beads: 1/4", 3/8"
- 2 Roman Ogee: 5/32", 1/4" Radius
- 2 Slot Cutter Assemblies, 3-Wing: 1/8", 1/4"
- 2 Flush Trims: 3/8", 1/2"
- 2 Bevel Trims: 7°, 15°
- 2 Hinge Straights: 1/2", 5/8"
- 2 Keyhole / Picture Hanging Bits: 3/8", 1/2"
- 1 Rabbeting Bit: 1/2"
- 1 Classic Pattern Bit: 5/32" Radius
- 1 Cove and Bead: 5/32" Radius
- 1 Ogee Fillet: 3/16" Radius
- 1 Double Round: 5/32" Radius
- 1 French Table Edge Bit: 5/16" Radius
- 1 Triple Bead: 1/4"
- 1 Face Frame: 1/2"
- 1 Bottom Cleaning: 1"
- 1 Combination Panel Pilot Bit: 3/8"
- 1 Lettering Bit: 60° - 1"
- 1 Point Cutting Roundover: 1/4" Radius
- 1 Plunge Roundover: 1/4" Radius
- 1 Plunge Cove and Bead: 1/8" Radius
- 1 Combination Bowl, Tray and Dish Bit: 3/4"
(5 Customer Reviews)
Write your own review
Product Rating:
Date Posted: 2009-02-09 00:00:00
|
|
Fantastic deal
|
|
Posted By: Ward
|
|
Location: Austin, TX United States
|
Comments:
Less than $3.00 per bit? You cannot beat the price and quality for this set. The storage case is an added bonus. It will tyake me a while to use every bit but there are no "dogs" in the set.
|
Product Rating:
Date Posted: 2007-12-07 00:00:00
|
|
Bang for your buck!
|
|
Posted By: Tim
|
|
Location: Wells, ME United States
|
Comments:
This set has everything you need at one amazing price! I love it.
|
Product Rating:
Date Posted: 2009-07-16 11:27:01
|
|
Great Router Bit Set
|
|
Posted By: Shelton Russell
|
|
Location: Virginia Beach, AL United States
|
Comments:
Great set. I bought this set on sale a while back for around $170. What a steal of a deal. Bits work great and still slice through wood.
|
Product Rating:
Date Posted: 2009-10-31 05:17:35
|
|
Unbeleivable
|
|
Posted By: Keith
|
|
Location: Brisbane Qld, AL Australia
|
Comments:
Unbeleivable price,Quality and presentation.Service from the staff beyond excellent.
|
Product Rating:
Date Posted: 2009-12-21 11:44:46
|
|
Super
|
|
Posted By: Charles Neil
|
|
Location: New Market , VA United States
|
Comments:
This is the best value in both selection and quality in the entire industry...
|
Router Saftey Chart - Suggested Speeds: | Bit Diameter | Max Speed | | up to 1" | 24000 RPM | | 1-1/16" to 2" | 18000 RPM | | 2-1/16" to 2-1/2" | 16000 RPM | | 2-9/16" to 3" | 14500 RPM | | over 3" | 12000 RPM | Router Saftey Tips: - Always wear eye and ear protection.
- Always use properly sharpened bits.
- Never use bits that are dull or damaged.
- Shank must be completely inserted into collet and then backed-off approximately 1/16".
- Don't "bottom-out" bit in collet.
- Never partially insert bit into collet. Tighten securely and recheck periodically for possible slippage or "run-out" due to wear.
- Keep collet clean and replace if worn.
- Never start the router with the bit in contact with wood.
- Always feed your work in the proper direction against the bit rotation.
- Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
- Do not face tool's discharge when operating.
- Always unplug router when changing bits or making adjustments.
- Use a router table and fence whenever possible.
- Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
- Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
- The bigger the bit, the lower RPM recommended (see chart).
|
|