10 in 1 Master Pro Rabbet Kit by EAGLE

Make 10 Cuts with Just One Bit!
SKU # 100-5075
$141.96 $
SAVE $57!
In Stock

Shop with Confidence. Our GUARANTEE.

The most versatile rabbet kit ever at a tremendous savings. Our rabbet bit with extra thick carbide features a full 1" cutting length. With the 10 bearings that are included, you will be able to cut any type of rabbet you will need and flush trim too! Kit includes a two flute, carbide tipped, 1/2" shank rabbet bit, 10 bearing guides plus allen key for bearing changes. Bearing depth conversion chart included.

Important Specs

  • Includes Bit: (150-1325)
  • # of Bearings: 10
  • Cutting Length: 1"
  • Cutting Depth: 3/4"
  • Additonal Depth of Cuts: 11/16", 5/8", 9/16", 1/2", 7/16",
    3/8", 5/16", 3/16", flush
  • Shank Size: 1/2"

Product Instructions:

10 in 1 Master Pro Rabbet Kit

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).
Sign up for our eNewsletter