Edge Banding Shaper Cutter Set
Put Hardwood edges on your Plywood, Particle Board or MDF stock! It's the simple and economical way for you to make your own hardwood edge banding to finish off those plywood or MDF panels and shelves from 1/2" to 1" thick.
Three wing, tungsten carbide tipped shaper cutters have excellent qualities suited for industrial shaping operations. They give clean cuts over extended periods, and are suitable for cutting soft or hard woods, plywood panels, glue-bonded panels, fiberglass or plastics. These cutters are designed to be worked under 13,000 RPM. Fit both 1/2" and 3/4" spindles.
Note: All shaper cutters come with 3/4" bores and 1/2" bushing adapters.
- For Stock Thickness: 1/2" to 1"
- Carbide Height: 1"
- Large Diameter: 2-5/8"