Router Circle Jig by MLCS

Mounts into the t-track on your router table
Review star icon Review star icon Review star icon Review star icon Review star icon 3 of 5 Stars (2 reviews)
SKU #415-9333
$39.99 $
SALE! SAVE $10!
In Stock

Shop with Confidence. Our GUARANTEE.

The laminate-covered MDF base supports your workpiece as it pivots on the center pin. You can make circles as small as 2-1/2" and up to 32" on our Router Table Top. On other router tables, the overall circle diameter will depend on the distance from the router bit to the end of your miter t-track. Includes a handy measuring accessory, designed to work with a 1/2" diameter or smaller straight bit, to give an easy, exact circle radius.

Write a Review

2 reviews
Circle Jig Failed On First Use by ()
Review star icon Review star icon Review star icon Review star icon Review star icon 1 Stars
One of the two screws that holds the T-bar on the bottom of the jig stripped out less than half way through my 1st circle and now there is enough play in the top plate that round circles can not be cut. I was making a test circle out of a piece of 3/4" fir plywood. The 1st pass (1/4" cut) went well. during the 2nd pass (also 1/4") the bit hit a knot in the wood and I suspect forced some chips between the router table top and the bottom of the jig forcing it up and stripping one of the screws. Now my project is on hold while I make repairs to a jig that I purchased so I wouldn't have to spend time making a jig. I have used MLCS products in the past and they have performed well so I was confidant that this one would also. I would appear that their quality has gone downhill in the last few years.
Eagle Response: We are very sorry this happened and will replace any defective parts right away. We do sell many of these without any problem and MLCS does continue to make a quality product. Please contact our customer service department and we will fix this issue ASAP.

Works well for bandsaw also. by ()
Review star icon Review star icon Review star icon Review star icon Review star icon 5 Stars
With a couple of slight modifications, I am using this jig to cut circles on my bandsaw. Much faster than routing circles.

Sign up for our eNewsletter