Door & Drawer Undercutter Kitchen Cabinet Bit Set Ogee by K-Premium

Premium Micro-grain carbide
SKU # 14510
$255.90 $
SAVE $20!

Shop with Confidence. Our GUARANTEE.

Full Description Below...

Important Specs

  • Rail & Stile Style: Ogee
  • Raised Panel Style: Ogee

With razor sharp, micro-grain carbide, diamond honed cutters, safety gauge shanks, and high hook and shear angles.

These sets feature router bits needed for furniture and cabinet making. Frame and panel construction is a woodworking standard and the strongest method of door building.

This premium set includes the following 1/2" Shank Router Bits:

  • The Undercutter Raised Panel Router Bit makes a flush or reduced upper panel profile, or adds a radius to the back of the panel. 3-1/8" large diameter.
  • The Matched Rail and Stile 2 Piece Router Bit Set creates precise rails and stiles that form the durable door frame. Use with 3/4" stock.
  • The Glue Joint Router Bit: when the panel needs to be wider than your stock, mill two or more pieces of stock with reverse cut edge joints to achieve the needed width. Assemble, glue up, and your panel is ready to be raised.
  • The Drawer Lock Router Bit cuts the drawer front and the drawer side for a perfectly matched, long lasting, extremely strong joint.

Rail & Stile Instructions

Glue Joint Instructions

Drawer Lock Instructions

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

The K-PREMIUM Difference:

  • LIFETIME GUARANTEE! Against Defects in workmanship and materials.
  • Micro-grain carbide: Premium fine grain carbide yields a longer cutting life, and allows multiple resharpenings.
  • High Hook & Shear angles: Allows cutter to slice smoothly into stock, producing the cleanest, splinter free cuts.
  • Anti-kickback design: Round shoulder between cutters drastically reduces the chance of kickback.
  • Diamond honed cutters: Multi-axis CNC grinders sharpen to a 600 grit mirror finish. Ground to +/- .005"
  • Non-stick coating: Baked on heat resistant coating prevents sawdust, resin and pitch build-up.
  • Safety Gauge Shank: Lines etched on the shank help you seat the bit in the router collet. A K-PREMIUM exclusive.

You May Also Like

Sign up for our eNewsletter