We've added OVER 100 New Items for Fall 2018.Shop Now

Crown Mold 2-1/2" - 1/2" Sh by MLCS

SKU #P14-3582
In Stock

Shop with Confidence. Our GUARANTEE.

Give your ceilings and case work cabinetry a finished look. Great for grandfather clocks. Use a 2 HP or greater table-mounted router. Using a 3/4" or greater by 2" board, make multiple passes, adjusting fence until profile is achieved. Cut off 45° excess using chamfer bit or table saw. Two flute and carbide tipped. Anti-kickback design.

NOTE: Router table use only!

Important Specs

  • D Large Dia.: 1-11/64"
  • L Cutting Length: 2-1/4"
  • Overall Length: 4"
  • Shank Size: 1/2"

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).
Sign up for our eNewsletter

This site uses cookies to collect data. By continuing to browse, you accept our Privacy Policy. Agree