NEW! FREE Shipping on All Orders in the Contiguous USA! ( Shipping Info)

70 Piece Master Router Bit Set 1/2" Shank by MLCS

Incredible value! Only $3.21 per Bit
SKU #P19-7002
$289.99 $
SAVE $90!
In Stock

Shop with Confidence. Our GUARANTEE.

Full Description Below...

This is the largest, most comprehensive carbide tipped router bit set that we have ever offered and at an amazingly low price with a savings of 80% off the individual prices!

These sets include just about every bit you'll ever need for a wide variety of common woodworking applications. All bits are carbide tipped and feature safety anti-kickback designs. Included is the handsome wall hanging wood chest.

70-Piece Set Includes:

  • 7 Standard Straights: 1/4", 5/16", 3/8", 7/16", 1/2", 3/4", 1"
  • 3 Plywood Dado Straights: 7/32", 31/64", 23/32"
  • 6 Roundovers: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" Radius
  • 6 Coves: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" Radius
  • 6 Dovetails: 7° x 5/8", 7-1/2° x 1/4", 9° x 3/8", 14° - 1/2", 5/8", 3/4"
  • 5 V-Grooves: 60° x 1/2, 90° x 3/8", 1/2", 5/8", 3/4"
  • 4 Chamfering Bits: 15°, 22-1/2°, 30°, 45°
  • 4 Round Nose Bits: 1/4", 3/8", 1/2", 3/4"
  • 2 Square Edge Beads: 1/4", 3/8"
  • 2 Roman Ogee: 5/32", 1/4" Radius
  • 2 Slot Cutter Assemblies, 3-Wing: 1/8", 1/4"
  • 2 Flush Trims: 3/8", 1/2"
  • 2 Bevel Trims: 7°, 15°
  • 2 Hinge Straights: 1/2", 5/8"
  • 2 Keyhole / Picture Hanging Bits: 3/8", 1/2"
  • 1 Rabbeting Bit: 1/2"
  • 1 Classic Pattern Bit: 5/32" Radius
  • 1 Cove and Bead: 5/32" Radius
  • 1 Ogee Fillet: 3/16" Radius
  • 1 Double Round: 5/32" Radius
  • 1 French Table Edge Bit: 5/16" Radius
  • 1 Triple Bead: 1/4"
  • 1 Face Frame: 1/2"
  • 1 Bottom Cleaning: 1"
  • 1 Combination Panel Pilot Bit: 3/8"
  • 1 Lettering Bit: 60° - 1"
  • 1 Point Cutting Roundover: 1/4" Radius
  • 1 Plunge Roundover: 1/4" Radius
  • 1 Plunge Cove and Bead: 1/8" Radius
  • 1 Combination Bowl, Tray and Dish Bit: 3/4"

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).
Sign up for our eNewsletter