24-Piece General Purpose Router Bit Sets by EAGLE

#1 Quality!

See Options Below

SAVE up to $184!

Shop with Confidence. Our GUARANTEE.

Full Description Below...

Everyone asks the same question: "What bits do I really need to get started?" When you shop and compare, you'll find that most competitors sets all look the same with the same selection of bits. These sets may look like a good value until you realize that you will probably never use up to half of them. So much for value.

At Eagle, we listened to our customer's comments and requests and have put together our own money-saving sets based upon what you, our customers have told us you really want! The result...sets that are usable in numerous applications, not just sitting in a drawer collecting dust. This set is your most economical way to buy the most popular bits. Top quality bits at a substantial savings... Now that's value!

1/4" Shank Router Bit Set (#100-2422) Includes:

  • 102-0442, STRAIGHT, 1/4" X 3/4"
  • 102-0832, STRAIGHT, 1/2" X 1"
  • 102-1222, STRAIGHT, 3/4" X 1"
  • 117-0822, FLUSH TRIM, 1/2" X 1"
  • 130-0602, ROUND NOSE, 3/8" X 1/2"
  • 132-0822, V-GROOVE, 90 DEGREE, 1/2"
  • 134-0802, DOVETAIL, 1/2" X 14 DEGREE
  • 150-0812, RABBET, 1/2" X 1/2"
  • 152-0612, CHAMFER, 45 DEGREE,5 /8"
  • 154-0602, COVE, 3/8" RADIUS
  • 156-0602, ROUNDOVER, 3/8" RADIUS
  • 169-0302, ROMAN OGEE, 5/32" RADIUS
  • 102-0632, STRAIGHT, 3/8" X 1"
  • 102-0752, STRAIGHT, 31/64" X 1" W/DWN SHR
  • 102-1192, STRAIGHT, 23/32" X 1" W/DWN SHR
  • 102-1602, STRAIGHT, 1"
  • 102-0332, STRAIGHT, 7/32" X 3/4" W/DWN SHR
  • 130-0802, ROUND NOSE, 1/2" X 5/8"
  • 142-0602, PICTURE HANGING/KEYHOLE, 3/8"
  • 154-0802, COVE, 1/2" RADIUS
  • 156-0202, ROUNDOVER, 1/8" RADIUS
  • 156-0302, ROUNDOVER, 3/16" RADIUS
  • 156-0402, ROUNDOVER, 1/4" RADIUS
  • 156-0802, ROUNDOVER, 1/2" RADIUS
  • 499-5731, ROUTER BIT STORAGE CASE

1/2" Shank Router Bit Set (#100-2425) Includes:

  • 102-0455, STRAIGHT, 1/4" X 3/4"
  • 102-0845, STRAIGHT, 1/2" X 1"
  • 102-1225, STRAIGHT, 3/4" X 1"
  • 117-0825, FLUSH TRIM, 1/2" X 1"
  • 130-0605, ROUND NOSE, 3/8" X 1"
  • 132-0815, V-GROOVE, 90 DEGREE, 1/2"
  • 134-0805, DOVETAIL, 1/2" X 14 DEGREE
  • 150-0815, RABBET, 1/2" X 1/2"
  • 152-0625, CHAMFER, 45 DEGREE, 5/8"
  • 154-0605, COVE, 3/8" RADIUS
  • 156-0605, ROUNDOVER, 3/8"RADIUS
  • 169-0305, ROMAN OGEE, 5/32" RADIUS
  • 102-0645, STRAIGHT, 3/8" X 1"
  • 102-0335, STRAIGHT, 7/32" X 3/4" W/DWN SHR
  • 102-0755, STRAIGHT, 31/64 X 1" W/DWN SHR
  • 102-1195, STRAIGHT, 23/32" X 1" W/DWN SHR
  • 102-1625, STRAIGHT, 1"
  • 130-0805, ROUND NOSE, 1/2" X 1-1/4"
  • 142-0605, PICTURE HANGING/KEYHOLE, 3/8"
  • 154-0805, COVE, 1/2" RADIUS
  • 156-0205, ROUNDOVER, 1/8" RADIUS
  • 156-0305, ROUNDOVER, 3/16" RADIUS
  • 156-0405, ROUNDOVER, 1/4" RADIUS
  • 156-0805, ROUNDOVER, 1/2" RADIUS
  • 499-5731, ROUTER BIT STORAGE CASE

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Description Item # Price    Qty
24-Piece General Purpose Router Bit Set - 1/2" Shank 100-2425 REG. $583.79
SALE $399.99
SAVE $184!
24-Piece General Purpose Router Bit Set - 1/4" Shank 100-2422 REG. $551.79
SALE $379.99
SAVE $172!

You May Also Like

Sign up for our eNewsletter