Solid Carbide Metric Spiral Up Cut Router Bits | Eagle America
Eagle America Solid Carbide Up Cut Metric Router Bits are ideal for planing, splining, inlays, joining or doing mortise and tenon work. Use on plywood, MDF, particleboard, wall panels, insulation sheeting, or laminates.
Spiral bits combine effective chip removal with a continuous shearing action cut not obtained from a standard straight bit. You'll get smoother cutting action with better results.
Up-cut spirals pull chips while cutting to eliminate build-up and clogging.
Upcut provides faster cutting while it pulls chips up and out of the work or towards the router.
The Eagle America Brand was created for the professional woodworker who needs a serious router bit with an exceptional cut, extremely high durability and longevity.
All bits Solid carbide.
Made in the USA
The Eagle America Difference
Lifetime Warranty against defects in workmanship and materials.
Precision ground carbide to +/- .005 tolerances & Balanced to speeds in excess of 25,000 RPM for true, chatter-free running.
High hook and relief shear angles with wide open gullets for easy chip ejection.
Single-piece, SOLID STEEL Bodies, not just a mere sand casting.
Finest Micrograin Carbide up to C-4 grade with tips up to 1/8" thick for longer life.
Shielded, high-RPM-rated bearings have special lubricants for mar-free routing.
Carbide honed with a 600 grit diamond wheel to a razor sharp mirror finish edge.
Steel is heat treated up to 3 times, and tested up to 45 RC hardness to guarantee against breakage.
Precision-ground shanks.
