Free "Best Way" Shipping Every Day in the Contiguous USA!( Shipping Info)

Face Frame V-Groove Trimmer by EAGLE

Trim face frames fast and give it a touch of class!

See Options Below

Shop with Confidence. Our GUARANTEE.

Ever try to flush up a face frame to a cabinet side and wonder how to hide the resulting seam? This bit is a cabinetmaker's dream. It removes the excess overhang from the face frame making it flush to the side while cutting a decorative V-Groove which can be attractively stained or even painted. Helps to hide a less then perfect seam where the two pieces join together.

All bits two flute, carbide tipped, with bearing guides. USA

NOTE: 117-1012 and 117-1015 feature down shear angle.

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

(D)
Large
Diameter
(L)
Cutting
Length
Overall
Length
Shank
Size
Item # Price    Qty
1/2" 1" 3-1/4" 1/4" 117-1002 $20.95
1/2" 1" 3-1/4" 1/4" 117-1012 $25.95
1/2" 1" 3-1/4" 1/2" 117-1005 $21.95
1/2" 1" 3-1/4" 1/2" 117-1015 $26.95

You May Also Like

Sign up for our eNewsletter