Round Nose Router Bits by EAGLE

For fluting, grooving, edge forming & sign making
Review star icon Review star icon Review star icon Review star icon Review star icon 5 of 5 Stars (1 review)

See Options Below

Shop with Confidence. Our GUARANTEE.

Also known as core box, reeding or veining bits, you'll find many uses for these bits such as in fluting flat surfaces in mantels, doors, drawers, panels, columns and general decorative trim work. Ideal bit for sign making, toy building, or just adding that beautiful little accent to a fine piece furniture. Make European style drawer front finger pulls. High up-shear angle lifts the chips out. Using an edge guide or in your router table, you can also use these bits to produce cove style edges and joints. All bits two flute, carbide tipped. USA

NOTE:
• 130-0202, 130-0302, 130-0402 are solid carbide

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).
Write a Review

1 review
Router Bits by ()
Review star icon Review star icon Review star icon Review star icon Review star icon 5 Stars
Trusted source for woodworking needs! Router Bits are of exceptional quality as are the other products that Eagle carries. Custer support is first class.

Product Options

(R)
Radius
(D)
Large Diameter
(L)
Cutting Length
Overall Length Shank Size Item # Price    Qty
1/16" 1/8" 1/4" 2" 1/4" 130-0202 $15.95
3/32" 3/16" 3/8" 2" 1/4" 130-0302 $15.95
1/8" 1/4" 1/2" 2" 1/4" 130-0402 $16.95
1/8" 1/4" 1/2" 2-1/2" 1/4" 130-0412 $17.95
Backordered until 10/13/2021. Reserve Now!
3/16" 3/8" 1/2" 2" 1/4" 130-0602 $19.95
3/16" 3/8" 1/2" 2-3/8" 1/4" 130-0612 $20.95
3/16" 3/8" 1" 2-5/8" 1/2" 130-0605 $26.95
1/4" 1/2" 5/8" 2-3/8" 1/4" 130-0802 $21.95
1/4" 1/2" 1-1/4" 2-7/8" 1/2" 130-0805 $26.95
5/16" 5/8" 7/16" 2" 1/4" 130-1002 $22.95
5/16" 5/8" 1-1/4" 2-7/8" 1/2" 130-1005 $28.95
3/8" 3/4" 5/8" 2" 1/4" 130-1202 $24.95
3/8" 3/4" 1-1/4" 2-7/8" 1/2" 130-1205 $31.95
7/16" 7/8" 1-1/4" 2-7/8" 1/2" 130-1405 $40.95
1/2" 1" 1-1/4" 2-7/8" 1/2" 130-1605 $42.95
5/8" 1-1/4" 1-1/4" 3" 1/2" 130-2005 $46.95
3/4" 1-1/2" 1-1/4" 3" 1/2" 130-2405 $55.95
7/8" 1-3/4" 1" 3" 1/2" 130-2805 $78.95
1" 2" 1-1/8" 3" 1/2" 130-3205 $83.95

You May Also Like

Sign up for our eNewsletter