We've added OVER 100 New Items for Fall 2018.Shop Now

V-Grooving & Plunge Lettering Bits by EAGLE

The sign maker's secret!

See Options Below

Shop with Confidence. Our GUARANTEE.

Full Description Below...

All bits ground to razor sharp points. Use for routing wheat patterns, drawer fronts, decorative panel veining, and edge chamfering. Use these bits to add a decorative accent to any furniture piece. The 22°, 45°, and 60° V-groove bits cut a very delicate vein and are used for sign making and wood threading applications. Also available with bearing for template routing. All bits two flute, carbide tipped. USA

NOTE:

  • Part numbers ending with B feature top mounted bearings
  • #132-0602B and #132-0622B are supplied without collars
  • #132-0422 is single flute
  • #132-0402, 0412, 0422, 0432 are solid carbide
  • #132-2405, 2805, 4005 are great for making furniture joints on stock up to 1-1/4" thick.

PACKAGE SAVINGS:

6 Piece Sign-Making Bit Set #100-3212 Includes:

  • 1/4" and 3/8" 90° V-groove
  • 1/2" 60° V-groove
  • 1/4", 3/8", 1/2" Round Nose bits.
  • All Bits 1/4" shank

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Degree D
Large
Dia.
L1
Cutting
Length
L2
Cutting
Length
Overall
Length
Shank
Size
Item # Price    Qty
22° 1/4" 5/8" - 2-1/2" 1/4" 132-0422 $24.95
45° 5/8" 3/4" 1/8" 2-7/16" 1/4" 132-1022 $26.95
45° 5/8" 3/4" 1/8" 2-7/16" 1/4" 132-1022B $36.25
60° 1/4" 1/4" 1/4" 1-1/2" 1/4" 132-0412 $14.95
60° 1/4" 1/4" 1/4" 2" 1/4" 132-0432 $16.95
60° 1/2" 7/16" 3/16" 2" 1/4" 132-0802 $18.95
60° 1/2" 7/16" 5/8" 2" 1/4" 132-0802B $27.75
60° 1/2" 7/16" 3/16" 2-3/8" 1/4" 132-0842 $19.95
60° 1/2" 7/16" 3/16" 2-3/8" 1/4" 132-0842B $28.75
60° 1/2" 7/16" 3/16" 2-1/4" 1/2" 132-0805 $19.95
90° 1/4" 1/8" 1/4" 1-5/8" 1/4" 132-0402 $14.95
90° 1/4" 1/8" 1/4" 2-1/2" 1/4" 132-0442 $15.95
90° 3/8" 3/16" 3/8" 1-3/4" 1/4" 132-0602 $15.95
90° 3/8" 3/16" 1/2" 1-3/4" 1/4" 132-0602B $21.25
90° 3/8" 3/16" 3/8" 2-3/8" 1/4" 132-0622 $16.95
90° 3/8" 3/16" 3/8" 2-3/8" 1/4" 132-0622B $22.25
90° 1/2" 1/4" 1/4" 1-11/16" 1/4" 132-0822 $17.95
90° 1/2" 1/4" 1/4" 1-11/16" 1/4" 132-0822B $26.75
90° 1/2" 1/4" 1/4" 2" 1/2" 132-0815 $19.95
90° 5/8" 3/8" 1/8" 2-1/8" 1/2" 132-1005 $34.95
90° 3/4" 3/8" 1/8" 2-1/4" 1/2" 132-1205 $36.95
90° 3/4" 3/8" 1/8" 2-1/4" 1/2" 132-1205B $50.95
90° 1" 1/2" 1/4" 2-1/4" 1/2" 132-1605 $44.95
90° 1" 1/2" 1/4" 2-1/4" 1/2" 132-1605B $61.75
90° 1-1/2" 3/4" 1/8" 2-3/4" 1/2" 132-2405 $62.95
120° 1-3/4" 9/16" 5/16" 2-3/8" 1/2" 132-2805 $64.95
6-Piece Sign Making Router Bit Set 100-3212 REG. $113.70
SALE $79.99
Combo Package Savings!

You May Also Like

Sign up for our eNewsletter