Dovetail Bits by EAGLE

Designed for function, built for production!

See Options Below

Shop with Confidence. Our GUARANTEE.

Full Description Below...

All of our dovetails are specially designed with high radial and axial relief angles to give you extra clean, sharp edges. You'll find many applications for these bits. Make creative and decorative glue joints for drawers and jewelry boxes, Shaker furniture and shadow boxes, sliding dovetail joints for table and leg extensions, or sliding drawer and shelf runners and dividers. Smaller degree bits can be used for stair tread stringer mortising or shelf supports. Larger diameter bits will produce unique finger pulls. All bits two flute, carbide tipped. USA

Helpful Hint: For best results when cutting dovetails and to minimize chipping and tearout, first cut the area with a straight bit to renove most waste. then cut with dovetail bit.

NOTE:
•Item numbers ending with B feature top mounted bearing
•134-0712B is for Keller Jig
•134-0822 is for Sears Dovetail Jig
•134-0915 is for Porter Cable Jig 4212
•134-1405 is used for making Stair Treads

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

D
Large
Dia.
A
Degree
L
Cutting
Length
Leigh
Jig #
Overall
Length
Shank
Size
Item # Price    Qty
1/4" 7-1/2° 5/16" - 2-1/2" 1/4" 134-0402 $19.95
1/4" 1/4" 50 2-1/4" 1/4" 134-0412 $19.95
1/4" 1/4" - 2-1/2" 8MM 134-0413 $23.95
5/16" 3/8" 60 2-1/4" 1/4" 134-0522 $19.95
5/16" 3/8" - 2-1/4" 8MM 134-0523 $23.95
5/16" 3/8" - 2-1/4" 1/4" 134-0502 $19.95
3/8" 1/2" 70 2-3/8" 1/4" 134-0602 $19.95
3/8" 1/2" - 2-3/8" 8MM 134-0603 $23.95
3/8" 3/8" - 2" 1/4" 134-0612 $19.95
3/8" 3/8" - 2-1/2" 1/2" 134-0615 $20.95
3/8" 14 3/8" - 2" 1/4" 134-0622 $19.95
7/16" 3/4" - 2-5/8" 1/4" 134-0712B $29.95
7/16" 5/8" 75 2-3/8" 1/4" 134-0702 $20.95
7/16" 5/8" - 2-3/8" 8MM 134-0703 $24.95
1/2" 13/16" 80 2-3/4" 1/4" 134-0832 $21.95
1/2" 13/16" 80 2-3/4" 1/4" 134-0832B $30.75
1/2" 13/16" - 2-3/4" 8MM 134-0833 $25.95
1/2" 10° 5/8" 101 2-1/2" 1/4" 134-0852 $20.95
1/2" 10° 5/8" - 2-1/2" 8MM 134-0853 $24.95
1/2" 10° 5/8" - 2-5/8" 1/2" 134-0855 $21.95
1/2" 14° 1/2" - 2" 1/4" 134-0802 $19.95
1/2" 14° 1/2" 120 2-3/8" 1/4" 134-0842 $20.95
1/2" 14° 1/2" 120 2-3/8" 1/4" 134-0842B $29.75
1/2" 14° 1/2" - 2-3/8" 8MM 134-0843 $24.95
1/2" 14° 1/2" - 2-1/2" 1/2" 134-0805 $21.95
1/2" 18° 3/8" - 2-1/4" 1/4" 134-0812 $20.95
1/2" 18° 3/8" - 2-1/4" 8MM 134-0813 $24.95
17/32" 3/4" - 2-1/2" 1/2" 134-0915 $22.95
17/32" 14" 1/2" - 2" 1/4" 134-0902 $21.95
5/8" 7/8" - 2-5/8" 1/2" 134-1005 $24.95
11/16" 1" 90 3" 1/2" 134-1115 $24.95
3/4" 7/8" - 2-5/8" 1/2" 134-1215 $25.95
Backordered until 3/28/2019. Reserve Now!
3/4" 14° 3/4" 130 3" 1/2" 134-1205 $24.95
3/4" 14° 3/4" 130 3" 1/2" 134-1205B $38.95
13/16" 1-1/4" 100 3-1/4" 1/2" 134-1305 $25.95
7/8" 7/8" - 2-1/2" 1/2" 134-1405 $27.95
1" 14° 7/8" - 2-1/2" 1/2" 134-1605 $31.95

You May Also Like

Sign up for our eNewsletter