Dovetail Router Bits | Eagle America
Eagle America Dovetail Router Bits make creative and decorative glue joints for drawers and jewelry boxes, Shaker furniture and shadow boxes, sliding dovetail joints for table and leg extensions, or sliding drawer and shelf runners and dividers.
Specially designed with high radial and axial relief angles to give you extra clean, sharp edges.
Smaller degree bits can be used for stair tread stringer mortising or shelf supports.
Larger diameter will produce unique finger pulls.
All bits two flute, carbide tipped with bearing guides.
Made in the USA
Helpful Hint: For best results when cutting dovetails and to minimize chipping and tearout, first cut the area with a straight bit to renove most waste. then cut with dovetail bit.
The Eagle America Difference
The Eagle America Brand was created for the professional woodworker who needs a serious router bit with an exceptional cut, extremely high durability and longevity.
Lifetime Warranty against defects in workmanship and materials.
Precision ground carbide to +/- .005 tolerances and Balanced to speeds in excess of 25,000 RPM for true, chatter-free running.
High hook and relief shear angles with wide open gullets for easy chip ejection.
Single-piece, SOLID STEEL Bodies, not just a mere sand casting.
Finest Micrograin Carbide up to C-4 grade with tips up to 1/8" thick for longer life.
Shielded, high-RPM-rated bearings have special lubricants for mar-free routing.
Carbide honed with a 600 grit diamond wheel to a razor sharp mirror finish edge.
Steel is heat treated up to 3 times, and tested up to 45 RC hardness to guarantee against breakage.
Precision-ground shanks.
