We've added OVER 100 New Items for Fall 2018.Shop Now

T-Slat Wall Channel Bits by EAGLE

Great for jigs and fixtures!

See Options Below

Shop with Confidence. Our GUARANTEE.

Mill horizontal T-slats which will accept the head of a standard bolt. Perfect for use on sliding shop fixtures and jigs. Use with washers for making hanging brackets or create sturdy and attractive commercial wall display units at a fraction of the cost of pre-cut panels. Can also be used for removable hinges. All bits carbide tipped. USA

Helpful Hint:Order T-Track Extrusions #416-0439 so your slat wall can handle heavier items without damaging your panels.

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Flutes (D)
Large
Diameter
(S)
Small
Diameter
(L1)
Cutting Length
(L2)
Cutting Length
Overall
Length
Shank Size Item # Price    Qty
1 29/64" 1/4" 3/16" 5/16" 1-1/2" 1/4" 143-0702 $24.95
1 17/32" 11/32" 1/8" 3/8" 2" 1/4" 143-0982 $25.95
2 1-1/16" 3/8" 5/16" 1/2" 2-3/8" 1/2" 143-1705 $46.95
2 1-3/16" 3/8" 1/4" 1/4" 2-3/8" 1/2" 143-1905 $52.95
4 ft. Extruded Aluminum Slat Wall Insert 416-0439
Buy 1 or more for $6.49 each
Buy 6 or more for $5.97 each
Mini T-Track Bolts 1/4-20 X 3" (Pkg 12) 416-0391
Buy 1 or more for $2.99 each
Buy 2 or more for $2.79 each
Sign up for our eNewsletter
×

This site uses cookies to collect data. By continuing to browse, you accept our Privacy Policy. Agree