Bowl and Tray Router Bits | Eagle America
Eagle America Bowl and Tray Router Bits rout straight sides, rounded bottom corners and a flat bottom all in one pass.
These bits are also our best Lettering Router Bits which are a sign maker's dream come true.
Designed to make either raised or recessed letters.
These bits will quickly remove any excess material while leaving a slight radius on the edge.
Great bit for creating "stress relief" areas in backs of large and long trim moldings.
For best results, use with template guides or ball bearing guides.
All bits two flute, carbide tipped.
Made in the USA
The Eagle America Difference
The Eagle America Brand was created for the professional woodworker who needs a serious router bit with an exceptional cut, extremely high durability and longevity.
Lifetime Warranty against defects in workmanship and materials.
Precision ground carbide to +/- .005 tolerances and Balanced to speeds in excess of 25,000 RPM for true, chatter-free running.
High hook and relief shear angles with wide open gullets for easy chip ejection.
Single-piece, SOLID STEEL Bodies, not just a mere sand casting.
Finest Micrograin Carbide up to C-4 grade with tips up to 1/8" thick for longer life.
Shielded, high-RPM-rated bearings have special lubricants for mar-free routing.
Carbide honed with a 600 grit diamond wheel to a razor sharp mirror finish edge.
Steel is heat treated up to 3 times, and tested up to 45 RC hardness to guarantee against breakage.