3-In-1 Bowl, Tray & Lettering Bits by EAGLE

A muilti-purpose bit you just can't be without!
Review star icon Review star icon Review star icon Review star icon Review star icon 4.5 of 5 Stars (2 reviews)

See Options Below

Shop with Confidence. Our GUARANTEE.

Full Description Below...

Designed to make bowls and trays, these bits rout straight sides, rounded bottom corners and a flat bottom all in one pass. These bits will quickly remove any excess material while leaving a slight radius on the edge. For best results, use with template guides or ball bearing guides.

Great bit for creating"stress relief" areas in backs of large and long trim moldings. A sign maker's dream come true. Our bits are designed to make either raised or recessed letters. These bits are also used to make boxes and coasters. All bits two flute, carbide tipped. USA

NOTE: Item numbers ending with B feature top mounted bearing.

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).
Write a Review

2 reviews
At last by ()
Review star icon Review star icon Review star icon Review star icon Review star icon 5 Stars
I have been making cribbage boards for quite a few years. Last year's sales numbered 100. The cribbage boards have storage in the base for the cards and pegs. These recesses have always been time consuming as the bases are solid hickory. My recent purchase of the Eagle 3 in 1 bowl router bit was a very pleasant surprise. The bits leave no scorching and plung easily.

Needs a little brother by ()
Review star icon Review star icon Review star icon Review star icon Review star icon 4 Stars
I bought 3 bowl templates and the 3/4" bowl bit, the 144-1205B. The bit is good, but is too large to fit into the tighter areas of the template. Eagle America need to sell a smaller diameter bit with the same radius so we can use all of the template. A 1/2 pattern bit with a 1/4" radius at the bottom would do nicely. Also, if you're looking to make bowls, I'd advise that you go ahead and get the router collet extension. You're not going to do much without it.

Product Options

Large Diameter
Cutting Length
Overall Length Shank Size Item # Price    Qty
1/8" 7/16" 1/2" 2-1/8" 1/4" 144-0702 $23.95
1/4" 3/4" 5/8" 2-3/8" 1/4" 144-1202 $29.95
1/4" 3/4" 5/8" 2-3/8" 1/4" 144-1202B $30.95
1/4" 3/4" 5/8" 2-3/8" 1/2" 144-1205 $30.95
1/4" 3/4" 5/8" 2-3/8" 1/2" 144-1205B $33.95
1/4" 1-1/4" 1/2" 2-1/2" 1/2" 144-2005 $33.95
1/4" 1-1/4" 1/2" 2-1/2" 1/2" 144-2005B $37.95

You May Also Like

Sign up for our eNewsletter