COVID-19 Notice: Please e-mail eagle@eagleamerica.com for help and support. Phone operators can process orders only. ( More Info)

Three & Four Wing Slot Cutters by EAGLE

Economical, interchangeable & replaceable!

See Options Below

Shop with Confidence. Our GUARANTEE.

All slot cutters are 1-7/8" in diameter, 1/2" cutting depth with a 5/16" diameter bore. Cutters are interchangeable and can be combined and stacked on the same arbor giving you a wide variety of cutting possibilities. Make sure cutters are put on the arbor in the proper cutting direction and always use the supplied spacers between the cutters and bearings. All cutters carbide tipped. Cutters and arbor assemblies sold separately. USA

NOTE:
1/16"- use for picture glass
5/64"- use for T-Moldings
1/8" - use for drawer bottoms
5/32"- use for biscuit jointing
7/32" & 15/64" -use for undersized plywood

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Cutting Length Type Item # Price    Qty
1/16" 3-Wing 146-0130 $17.95
1/16" 4-Wing 146-0140 $21.95
5/64" 3-Wing 146-0330 $18.95
5/64" 4-Wing 146-0340 $22.95
3/32" 3-Wing 146-0430 $18.95
3/32" 4-Wing 146-0440 $22.95
1/8" 3-Wing 146-0630 $19.95
1/8" 4-Wing 146-0640 $23.95
4mm (5/32") 3-Wing 146-0830 $19.95
4mm (5/32") 4-Wing 146-0840 $23.95
3/16" 3-Wing 146-0930 $20.95
3/16" 4-Wing 146-0940 $24.95
5.5mm (7/32") 3-Wing 146-2230 $20.95
Backordered until 8/15/2020. Reserve Now!
5.5mm (7/32") 4-Wing 146-2240 $24.95
5.9MM (15/64") 3-Wing 146-2330 $20.95
5.9mm (15/64") 4-Wing 146-2340 $24.95
1/4" 3-Wing 146-1030 $20.95
1/4" 4-Wing 146-1040 $24.95
9/32" 3-Wing 146-2830 $21.95
9/32" 4-Wing 146-2840 $25.95
5/16" 3-Wing 146-3130 $25.95

You May Also Like

Sign up for our eNewsletter