Rabbet Flooring Under Cutter & Lettering Bit by EAGLE

Clean out old tongue and groove flooring easily!

See Options Below

Shop with Confidence. Our GUARANTEE.

For floor repairs where a bottom mounted bearing makes it impossible to plunge the bit low enough. Use 149-1612B to clean out the old groove fast. Also used with lettering or other patterns to make them look like they are floating on air. Using various bearing guides will alter your depth of cut. All bits two flute, carbide tipped. USA

NOTE: Item numbers ending with B feature top mounted bearing.

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Cutting Length
Cutting Depth
Large Diameter
Overall Length Shank Size Item # Price    Qty
1/8" 1/4" 3/4" 1-7/8" 1/4" 149-1202 $24.95
1/8" 1/2" 1-1/4" 1-3/4" 1/4" 149-2002 $21.95
1/8" 3/8" 1-1/4" 1-3/4" 1/4" 149-2002B $30.95
1/4" 3/8" 1" 2" 1/4" 149-1612 $21.95
1/4" 1/4" 1" 2" 1/4" 149-1612B $34.95
1/4" 5/8" 1-1/2" 2" 1/4" 149-2402 $29.95
1/4" 1/2" 1-1/2" 2" 1/4" 149-2402B $35.95

You May Also Like

Sign up for our eNewsletter