NEW! FREE Shipping on All Orders in the Contiguous USA! ( Shipping Info)

Rabbet Bits by EAGLE

Extra Thick Carbide for Extra Long Life!

See Options Below

Shop with Confidence. Our GUARANTEE.

Full Description Below...

• Rabbets • Lap Joints • Inlays
• Slotting • Dados • Tongue & Groove
• Inset Cabinet Doors • Drawer Faces

Our rabbets are designed to give you super smooth cuts on all 3 cutting surfaces. Complete with ball bearing guide for mar-free precision cutting. Relieved on top and bottom with shear angle for easy chip free routing. All rabbets come with standard 1/2" bearing but can be changed to other sizes for a variety of cutting depths. All bits two flute, carbide tipped with bearing guide. USA

Click here for Rabbet Cutting Depth Conversions Chart PDF.


brand - click here
What's the difference?

Product Instructions:

Rabbet Bits

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

(L)
Cutting Length
(C)
Cutting Depth
(D)
Large Diameter
Overall Length Shank Size Item # Price    Qty
1/8" 3/8" 1-1/4" 2" 1/4" 150-0202 $22.95
1/8" 3/8" 1-1/4" 2" 1/2" 150-0205 $22.95
5/32" 1/2" 1-1/2" 1-7/8" 1/4" 150-0302 $22.95
5/32" 1/2" 1-1/2" 2" 1/2" 150-0305 $22.95
1/4" 3/8" 1-1/4" 2" 1/4" 150-0402 $24.95
1/4" 3/8" 1-1/4" 2" 1/2" 150-0405 $24.95
3/8" 3/8" 1-1/4" 2-1/8" 1/4" 150-0602 $26.95
3/8" 3/8" 1-1/4" 2-1/8" 1/2" 150-0605 $26.95
1/2" 3/8" 1-1/4" 2" 1/4" 150-0802 $27.95
1/2" 3/8" 1-1/4" 2-1/4" 1/2" 150-0805 $27.95
1/2" 1/2" 1-1/2" 2" 1/4" 150-0812 $28.95
1/2" 1/2" 1-1/2" 2-1/4" 1/2" 150-0815 $28.95
3/4" 3/8" 1-1/4" 2-1/2" 1/2" 150-1205 $26.95
1" 3/4" 1-7/8" 2-7/8" 1/2" 150-1325 $49.95
Sign up for our eNewsletter