Miniature Brass Piloted Roundover Bits by EAGLE

Designed for tight spaces!

See Options Below

SAVE $12 with Combo Set!

Shop with Confidence. Our GUARANTEE.

Full Description Below...

Now you can get into tight spaces and round over those sharp edges. No need for hand sanding. Our bits will give you a smooth quality consistent edge every time. All bits are two flute, carbide tipped and feature a small 5/32" brass pilot instead of a ball bearing guide. USA

SAVE! Three Piece Miniature Roundover Bit Set

Three piece set #100-5903 includes:

  • 1/16" radius Brass Piloted Round Over Bit #159-0102
  • 1/8" radius Brass Piloted Round Over Bit #159-0202
  • 1/4" radius Brass Piloted Round Over Bit #159-0402

brand - click here
What's the difference?

Product Instructions:

Miniature Brass Piloted Roundover Bits

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Large Diameter
Cutting Length
Overall Length Shank Size Item # Price    Qty
1/16" 13/32" 7/16" 2" 1/4" 159-0102 $29.95
1/8" 7/16" 3/8" 2" 1/4" 159-0202 $29.95
1/4" 11/16" 1/2" 2-1/8" 1/4" 159-0402 $29.95
3/8" 15/16" 5/8" 2-1/4" 1/4" 159-0602 $29.95
3 Piece Mini-Roundover Set 1/4"Shank 100-5903 REG. $89.85
SALE $77.95
SAVE $12!

You May Also Like

Sign up for our eNewsletter