Handrail Undercut Bits by EAGLE

Save $$$... make your own handrails!

See Options Below

Shop with Confidence. Our GUARANTEE.

Until now, your choices in handrail stock were limited to a narrow selection of woods and profiles at high prices. Use these bits to form the under-cut portion of a handrail. Finish the top portion with almost any Eagle edge forming bit. For best results use in router table.

All bits two flute, carbide tipped, with bearing guides. USA

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Item # Price    Qty
5/16" 3/4 1-1/4" - 3" 1/2" 174-9015 $69.95
9/16" 2-1/8" 1-5/8" - 3-5/8" 1/2" 174-9025 REG. $89.95
SALE $84.95
- 1-1/2" 1-1/4" - 3" 1/2" 174-9075 $59.95

You May Also Like

Sign up for our Eclub!