NEW! FREE Shipping on All Orders in the Contiguous USA! ( Shipping Info)

Wide Crown Molding System by EAGLE

Create Your Own Moldings up to 5-1/2" Wide !

See Options Below

Shop with Confidence. Our GUARANTEE.

Give that room the extra beauty and elegance it deserves. When used in combination with each other you can make ceiling crown molding trim up to 5-1/2" wide with your router. That's big! Mix or match to produce different profile designs. Use in router table only with high fence. All bits two flute, carbide tipped, 1/2" shank with anti-kickback design. USA

brand - click here

What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Bit L
Length
D
Dia.
Shank
Size
Overall
Length
Item # Price    Qty
B 2-3/8" 1-1/4" 1/2" 4" 175-2505 $89.95
D 3" 1-5/16" 1/2" 4-7/16" 175-2135 $89.95
E 3" 1-1/4" 1/2" 4-1/2" 175-2145 $89.95
F 3-1/16" 1-3/8" 1/2" 4-9/16" 175-2175 $94.95
G 3-1/16" 1-3/8" 1/2" 4-916" 175-2185 $94.95

You May Also Like

Sign up for our eNewsletter