Door & Drawer Edge Profiles & Pulls by EAGLE

Add functionality and elegance to your cabinet doors!

See Options Below

Shop with Confidence. Our GUARANTEE.

For closing and end trims of your cabinet doors and drawers. A great addition to any cabinet door and drawer set. The #180-2405 combines a back cutter with a rounded top edge. With our "Reversible European" design #180-2805 you can use the profile in either direction and still have a functional finger grip. Adjust cutter heights for desired upper bead reveal. Shaded areas in drawings indicates profile when used with European-type cup hinges. All bits two flute, carbide tipped. For best results use in router table. USA

brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Item # Price    Qty
1-7/16" 7/16" 1-3/16" 3" 1/2" 180-2405 $54.95
1-1/2" 1/2" 7/8" 2-3/4" 1/2" 180-2825 $54.95
1-5/8" 9/16" 7/8" 2-1/4" 1/2" 180-2805 $57.95
1-7/16" 13/32" 13/16" 2-1/2" 1/2" 180-2505 $54.95
3/4" 3/16" 7/8" 2-3/8" 1/2" 181-1205 $52.95
3/4" 3/16" 7/8" 2-3/8" 1/2" 181-1205B $66.95
1-1/2" 3/8" 13/16" 2-5/16" 1/2" 181-2405 $54.95

You May Also Like

Sign up for our eNewsletter