2-Piece Stile And Rail Bit Sets by EAGLE

For 11/16" to 7/8" thick stock
Review star icon Review star icon Review star icon Review star icon Review star icon 5 of 5 Stars (3 reviews)

See Options Below

Shop with Confidence. Our GUARANTEE.

Full Description Below...

Making beautiful and professional looking cabinet doors is easy! Our cutters can be used to make square edge or arch cathedral pattern doors without the need for a fence. Bits can be converted to make beautiful glass door or picture frames from 5/8" to 1" thick without the need for additional cutters. You can also flip your stock over to create up to 1-3/8" double passage interior doors. All bits two flute, carbide tipped, 1/2" shank with ball bearing guides and cut a standard 1/4" x 3/8" thick tongue. Use in router table only. Instructions included. USA

Plywood Stile and Rail Sets: Ready to use sets for 1/4" flat plywood panels (7/32" or 5.5 mm). Conversion kit not required.

Miniature 2-Piece Stile and Rail Bit Sets: (185-0710, 185-0810) Make doors as small as 2" square from 3/8" to 3/4" thick with our reduced profile Stile and Rail and Panel bits. The panel groove measures 5/32" thick by 1/4"deep. Setup Kwik Blocks and Door templates are also available. All bits 1/2" shank, two flute and carbide tipped with ball bearing guides. USA

brand - click here
What's the difference?

Product Instructions:

2-Piece Stile And Rail Bit Sets

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).
Write a Review

3 reviews
Great bits! by ()
Review star icon Review star icon Review star icon Review star icon Review star icon 5 Stars
I purchased 20 degree stile and rail set and the matching set up blocks and I could not be happier. Perfect set up right out of the box. The first set of doors I built were awesome. Looking forward to using them again. I did a lot of research before I made the purchase I was pleased with the price and quality. They are made in the USA so what more could you ask for!

Clean Cuts by ()
Review star icon Review star icon Review star icon Review star icon Review star icon 5 Stars
Been using these stile and rail bits for a while now and with the set up blocks I get clean cuts with perfect fits every time.

Pricey but worth it!!! by ()
Review star icon Review star icon Review star icon Review star icon Review star icon 5 Stars
Excellent set of rail and stile bits. Razor sharp and set perfectly. They are very good bit and I would highly recommend them to anyone.

Product Options

Profile Item # Price    Qty
Roman Ogee 185-0700 $135.99
Roman Ogee
185-0725 $140.00
Traditional Ogee 185-0300 $135.99
Cove & Bead 185-0200 $135.95
Double Round 185-1000 $159.95
Round 185-0800 $135.99
185-0825 $140.00
Bead 185-0900 $135.99
20° Bevel 185-0400 $138.99
Backordered until 1/31/2022. Reserve Now!
15° Shaker Bevel 185-0500 $139.95
15° Shaker Bevel
185-0525 $149.95
Cove 185-0600 $124.95
Southwestern 185-1100 $134.95
Mini Stile & Rail - Ogee 185-0710 $144.95
Mini Stile & Rail - Round 185-0810 $149.95

You May Also Like

Sign up for our eNewsletter