Raised Panel Bits - Medium by EAGLE

For 5/8" to 3/4" stock

See Options Below

Shop with Confidence. Our GUARANTEE.

Use our bits on both square and arch (cathedral) door patterns. Eagle America panel raisers are manufactured with a shear angle to produce optimum cuts both with and across the grain. These bits can also be used to make attractive drawer fronts, table tops, plaques and moldings. The material size you select will affect how much upper bead profile you will achieve. All bits two flute, carbide tipped, with bearing guides. USA

NOTE: Beige area on illustrations denotes what you loose with 5/8" material or use with back cutter.

Large Diameter: 2-1/2"
Cutting Depth: 1"
Overall Length: 2-1/2"
Shank Size: 1/2"

Product Instructions:

Raised Panel Bits - Medium

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Profile Item # Price    Qty
Cove 186-4005 $79.95
Bevel 25 Degree 186-4035 $79.95
Classic Ogee 186-4065 $79.95
Ogee Bead 186-4075 $79.95
Ogee 186-4015 $79.95

You May Also Like

Sign up for our eNewsletter