COVID-19 Notice: Please e-mail eagle@eagleamerica.com for help and support. Phone operators can process orders only. ( More Info)

Plunge Panel & Stile Bits by EAGLE

Make beautiful MDF faux panel doors and wainscot paneling!

See Options Below

Shop with Confidence. Our GUARANTEE.

Designed to give a raised panel look in MDF and solid panel doors. Also used to make Wainscot paneling. All bits two flute, carbide tipped, 1/2" shank with an overall length of 2-1/2". USA

NOTE: Part numbers ending with "B" feature top mounted bearing guide.



brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

(D)
Large Diameter
(A)
Small Diameter
(L)
Cutting Length
(R)
Radius/
Degree
Shank
Size
Item # Price    Qty
7/8" 1/2" 7/16" 7/32" 1/2" 186-5625 $41.95
7/8" 1/2" 7/16" 7/32" 1/2" 186-5625B $57.95
1-1/4" 1/2" 7/16" 3/16" 1/2" 186-5635 $44.95
1-1/4" 1/2" 7/16" 3/16" 1/2" 186-5635B $64.25
1-1/4" 1/2" 1/2" 3/16" 1/2" 186-5645 $44.95
1-1/4" 1/2" 1/2" 3/16" 1/2" 186-5645B $64.25

You May Also Like

Sign up for our eNewsletter