We've added OVER 100 New Items for Fall 2018.Shop Now

2-Piece Edge Banding Bit Sets by EAGLE

Put hardwood edges on your plywood, particle boards or MDF stock!
Review star icon Review star icon Review star icon Review star icon Review star icon 5 of 5 Stars (1 review)

See Options Below

Shop with Confidence. Our GUARANTEE.

Here is a simple way for you to make your own hardwood edge banding to finish off those plywood or MDF panels and shelves from 1/2" to 1" thick.

Simply set the male groovers in your router table so that the center point of the bit is centered on the stock and make the cut. Now using the female grooves in your router table, set the height of the bit so that the center point of the bit matches the center point of the panel stock and then cut out the hardwood stock material. Glue the two pieces together and flush trim the edges if necessary. Two styles available. The 90° bit sets (A) also makes horizontal v-grooves or double sided chamfers. The 60° bit sets (B) feature a tongue and groove design for a larger gluing surface. All bits two flute, carbide tipped, 1/2" shank with bearing guides.USA.



brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).
Write a Review

1 review
Great edging on plywood by ()
Review star icon Review star icon Review star icon Review star icon Review star icon 5 Stars
I read a review that was less than favorable but decided to get them anyway (the set that goes the deepest). I'm glad I did, they work great. You have to be careful not to damage the thin edges of the plywood as it is being routed, but other than that, it was easy (even that was easy). The resulting edge is almost undetectable on the oak plywood that I used.

Product Options

Image L
Cutting
Length
D
Large
Dia.
Overall
Length
Shank
Size
Item # Price    Qty
A 3/4" 1-3/8" 2-1/2" 1/2" 190-2065 $89.95
A 1" 1-1/2" 2-1/2" 1/2" 190-2055 $104.95
B 3/4" 1-5/16" 2-1/2" 1/2" 190-2075 $99.95
B 1" 1-7/16" 2-1/2" 1/2" 190-2045 $124.95
Sign up for our eNewsletter