Ball Bearing Guides

Totally enclosed ball bearings.

See Options Below

Shop with Confidence. Our GUARANTEE.

Full Description Below...

By replacing your router bit's bearing with a bearing that has a smaller or larger Outer Diameter, you can achieve a different depth or profile.

Please measure your bearings accurately before ordering.

Calculating Bearing Size for Desired Depth of Cut:
Bearing Outer Diameter = Large Diameter of Bit - (2 x Desired Cut Depth)

38 Piece Bearing Repair Kit

Kit Includes all the following:

  • 16 bearings (3/8" OD x 3/16" ID, 1/2" OD x 3/16" ID, 5/8" OD x 3/16" ID, 3/4" OD x 3/16" ID, 7mmOD x 4mmID, 10mmOD x 5mmID, 13mmOD x 5mmID, 16mmOD x 5mmID, 19mmOD x 5mmID, 1/2" OD x 1/4" ID, 5/8" OD x 1/4" ID, 3/4" OD x 1/4" ID, 3/4" OD x 1/2" ID, 1" OD x 1/2" ID, 1-1/8" OD x 1/2" ID, 7/8" OD x 5/16" ID)
  • 4 stop collars (2 each 7/16" OD x 1/4" ID, 11/16" OD x 1/2" ID)
  • 6 hex keys
  • 12 screws

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

A
Outside
Diameter
B
Inside
Diameter
C
Bearing Height
Item # Price    Qty
38 Piece Bearing Repair Kit 380 $29.95
1/4" 1/8" 7/64" #259
(Old/Eagle 196-0400)
$4.50
3/8" 1/8" 5/32" #205
(Old/Eagle 196-0600)
$4.50
9mm (approx 3/8") 3.5mm (approx 1/8") 4mm 253 $4.50
7mm (approx 1/4") 4mm (approx 5/32") 2.5mm 250 $4.50
9mm (approx 3/8") 4mm (approx 5/32") 4mm 252 $4.50
3/8" 3/16" 1/8" #255
(Old/Eagle 196-0611)
$4.50
1/2" 3/16" 3/16" #256
(Old/Eagle 196-0800)
$4.50
5/8" 3/16" 3/16" #257
(Old/Eagle 196-1010)
$5.50
Backordered until 11/30/2021. Reserve Now!
3/4" 3/16" 3/16" #258
(Old/Eagle 196-1220)
$6.00
Backordered until 11/30/2021. Reserve Now!
7/8" 3/16" 3/16" #211
(Old/Eagle 196-1410)
$7.00
1" 3/16" 3/16" #212
(Old/Eagle 196-1600)
$7.00
1-1/8" 3/16" 3/16" #214
(Old/Eagle 196-1820)
$9.00
1-1/4" 3/16" 3/16" #215
(Old/Eagle 196-2010)
$9.00
1-9/32" 3/16" 3/16" 196-2100 REG. $13.99
SALE $9.00
1-3/8" 3/16" 3/16" 196-2200 REG. $14.69
SALE $9.00
1-1/2" 3/16" 3/16" #208
(Old/Eagle 196-2410)
$10.00
1-7/8" 3/16" 3/16" #217
(Old/Eagle 196-3010)
$11.00
9mm (approx 3/8") 5mm (approx 13/64") 3mm 270 $5.00
13mm (approx 1/2") 5mm (approx 13/64") 4mm 247 $5.00
16mm (approx 5/8") 5mm (approx 13/64") 5mm 248 $5.50
19mm (approx 3/4") 5mm (approx 13/64") 6mm 249 $6.00
19mm (approx 3/4") 6mm (approx 1/4") 6mm 254 $6.00
3/8" 1/4" 1/8" #209
(Old/Eagle 196-0620)
$5.00
1/2" 1/4" 3/16" #260
(Old/Eagle 196-0810)
$5.50
5/8" 1/4" 3/16" #261
(Old/Eagle 196-1000)
$5.50
3/4" 1/4" 1/4" #262
(Old/Eagle 196-1200)
$6.00
7/8" 1/4" 1/4" 196-1450 REG. $12.59
SALE $7.00
1" 1/4" 3/16" #213
(Old/Eagle 196-1610)
$9.00
16mm (approx 5/8") 8mm (approx 5/16") 5mm #237
(Old/Eagle 196-1020)
$6.00
19mm (approx 3/4") 8mm (approx 5/16") 6mm #267
(Old/Eagle 196-1230)
$6.00
22mm (approx 7/8") 8mm (approx 5/16") 7mm #266
(Old/Eagle 196-1400)
$6.00
1-1/8" 8mm (approx 5/16") 7mm #12111
(Old/Eagle 196-1810)
$9.00
1-1/4" 8mm (approx 5/16") 7mm #12112
(Old/Eagle 196-2020)
$9.00
1-3/8" 8mm (approx 5/16") 7mm #12113
(Old/Eagle 196-2220)
$9.50
1-5/8" 8mm (approx 5/16") 7mm #12114
(Old/Eagle 196-2610)
$9.50
3/4" 1/2" 3/16" #263
(Old/Eagle 196-1210)
$7.00
7/8" 1/2" 1/4" 196-1415 REG. $12.99
SALE $9.00
1" 1/2" 15/64" #265
(Old/Eagle 196-1620)
$7.00
1-1/8" 1/2" 5/16" #264
(Old/Eagle 196-1800)
$7.50
1-1/4" 1/2" 5/16" #227
(Old/Eagle 196-2000)
$8.50
1-3/8" 1/2" 7/16" #228
(Old/Eagle 196-2210)
$9.00
1-1/2" 1/2" 5/16" #229
(Old/Eagle 196-2420)
$12.00
1-7/8" 1/2" 5/16" 196-3020 REG. $18.49
SALE $14.00

You May Also Like

Sign up for our eNewsletter