3 Piece Raised Panel Door Sets by EAGLE

All Router Bits Constructed in the USA

See Options Below

SAVE Up to $34!

Shop with Confidence. Our GUARANTEE.

Full Description Below...

Make perfect raised panel doors with the best router bits made in the USA.

All bits are 1/2" Shank, carbide-tipped and are for use in a router table only.

SAVE! 3 Piece Raised Panel Door Sets

Ogee/Ogee Set #199-1871 includes:

  • Ogee Bead Raised Panel Bit #186-5825.
  • Roman Ogee Stile and Rail Set #185-0700

Cove/Round Over Set #199-1872 includes:

  • Cove Raised Panel Bit #186-5805.
  • Round Over Stile and Rail Set #185-0800

3-Wing Safety Raised Panel Bits

For 5/8" to 3/4" thick stock. Also makes great door fronts. Designed for straight, arch pattern, and cathedral doors. The ball bearing guide allows you to follow a pattern. These router bits feature anti-kickback design. Overall length is 3". Use light, multiple passes. See: 3-Wing Safety Raised Panel Bits.

2 Piece Stile and Rail Set

For 11/16" to 7/8" thick stock. Make square edge or arch cathedral pattern doors without the need for a fence. All bits cut a standard 1/4" x 3/8" thick tongue and they are two-flute with ball bearing guides. Instructions included. See: 2-Piece Stile and Rail Bit Sets.

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Description Item # Price    Qty
Ogee Bead/Roman Ogee 3 Piece Raised Panel Door Set 199-1871 REG. $264.95
SALE $239.95
SAVE $25!

You May Also Like

Sign up for our Eclub!