Architectural Molding Bits by EAGLE

Save Money by Making Your Own Moldings

See Options Below

SAVE $98 on Value Set!

Shop with Confidence. Our GUARANTEE.

Architectural Molding Bits 6-Piece Value Set

#199-7505 includes:

  • All 6 Architectural Molding Bits (1/2" Shank)

Save money when you make your own base, cabinet and trim moldings with our bits. Great for architectural millwork including: window sills, casings, baseboards, chair rail, door casings and panel moldings. Personalize picture frames and hand rails. All bits two flute and carbide tipped, with bearing guides.

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Image C
Cutting
Depth
D
Large
Dia.
L
Cutting
Length
B
Bead
Dia.
Overall
Length
Shank
Size
Item # Price    Qty
5/8" 1-3/4" 1-1/8" 1/4" 3-1/8" 1/2" 174-2805 $84.95
1/4" 1" 1" 5/16" 2-3/4" 1/2" 175-1605 $41.95
5/16" 1-1/8" 1-5/8" 1/4" 3-1/2" 1/2" 175-0305 $41.95
3/16" 7/8" 1-5/8" 5/16" 3-1/2" 1/2" 175-0205 $41.95
1/4" 1" 1-5/8" 1/4" 3-1/2" 1/2" 175-0505 $46.95
3/16" 7/8" 1-7/8" 1/4" 3-5/8" 1/2" 175-0815 $49.95
6 Piece Architectural Molding Set- 1/2" Shank 199-7505 REG. $307.70
SALE $209.99
Value Set Savings! SAVE $98!
Sign up for our eNewsletter