Spiral Upcut Router Bits | Solid Carbide | MLCS
MLCS Spiral Upcut Router Bits An upcut router bit is typically used for cutting materials that produce long, stringy chips or sawdust, such as solid wood, MDF, and plastics. The upward spiral of the bit helps to lift the chips and debris out of the cut, reducing the chance of clogging or burning the material.
Upcut router bits are also useful for cutting mortises, as they can help to clear out the material more efficiently and prevent clogging. However, because the bit pulls the chips and debris up, it can sometimes cause the top edge of the material to chip or splinter. Therefore, upcut bits are generally not recommended for cutting materials that require a clean edge on both sides, such as veneers or laminates.
Will cut faster, smoother and stays sharper longer.
Produces a very clean, fast and accurate cut with minimal chatter.
Upcut spiral helps remove material.
Ideal for making mortise and tenon joints.
Ideal for soft and hard woods, plywoods & composites, laminates, plastics and some non-ferrous metals.
2 flute flat bottom cutters.
Top quality micro-grain solid carbide
The MLCS Difference
The MLCS Brand was created for the cost conscience woodworker who needs a quality router bit that has a very good cut, good durability, good longevity but still has a great price.
3 Year Warranty against defects in workmanship and materials.
Bits are milled from solid steel bodies and are precision ground by CNC machines to tolerances of +/-.005.
Carbide tips are diamond honed up to a 400-grit for a mirror finish with razor sharp edges.
High hook and shear angle designs are used to allow the bits to slice through the wood for a clean, fast and chatter free chip removal.
Anti-Kickback safety designs are used in bits that are 3/4" in diameter or greater.
Bodies are heat treated for strength and durability.
Non-stick PTFE coating applied to prevent pitch and resin build-up.
PRICE - These bits are up to 70% less then you will find elsewhere.