Simple Dovetail Jig | MLCS
Our simple dovetail jig is an easy to use, inexpensive tool for making classic through dovetails, a joint that is the hallmark of fine craftsmanship.
A simple jig for your router table.
The Brass Hold down clamps secure stock for dovetails from 1/2" to 7/8" thick. They are fully adjustable, and slide easily side-to-side in the T-Track.
Made of sturdy cast aluminum and cuts either 3/4" wide tails, 1-1/8" on center or 1" wide tails, 2" on center.
For stock thickness of 1/2" to 7/8" (max).
After a one time initial setup, simply clamp the dovetail jig in place on each board, and rout the pins and tails.
There is no limit to the length of board you can dovetail, and by shifting the jig, you can create variable spaced or extra wide dovetails.
The FREE 5/8" Router Guide Bushing works with any router that has a router baseplate with a 1-3/16" center hole.
A Simple Dovetail Jig using a Through Dovetail Clamping System
