Rabbeting Kits by MLCS

Achieve multiple depths of cut.

See Options Below

SAVE $39 with 11 Piece Kit!

Shop with Confidence. Our GUARANTEE.

Just change the ball bearing guides to achieve different depths of cut!

Kit includes a carbide tipped rabbeting bit with 1/2" carbide height (except #8671 which has a 1" carbide height), four, seven, or nine bearings, and a hex key.

Use for cutting rabbets, tongue and groove joints and shiplap joints. Will also cut a slot.

9 Piece Kits #6066/#8366 include a Wood Storage Box.

11 Piece Rabbeting Kit--Our Most Complete

Our 11-piece set consists of:

  • Rabbeting Bit with 1/2" OD bearing (#7689)
  • 8 additional Bearings (5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", & 1-7/8" OD)
  • Hex key (#269, 3/32").

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Bearings Depth of Cut Additional Depth of Cut Large Diameter Shank Size Item # Price    Qty
4 1/4" 5/16", 3/16", 1/8" 1" 1/4" 6367 $26.00
4 1/4" 5/16", 3/16", 1/8" 1" 1/2" 8667 $26.00
4 1/2" 9/16", 7/16", 3/8" 1-1/2" 1/2" 8669 $28.00
Backordered until 8/3/2022. Reserve Now!
4 3/4" 13/16", 11/16", 5/8" 2" 1/2" 8666 $39.00
7 1/2" 7/16", 3/8", 5/16", 1/4", 1/8" 1-3/8" 1/4" 6066 $32.95
Wood Storage Box
7 1/2" 7/16", 3/8", 5/16", 1/4", 1/8" 1-3/8" 1/2" 8366 $32.95
Wood Storage Box
9 3/4" 11/16", 5/8", 9/16", 1/2", 7/16", 3/8", 1/4", 1/16" 2" 1/2" 8671 REG. $98.95
SALE $59.95
SAVE $39!

You May Also Like

Sign up for our Eclub!