Slab Flattening / Bottom Cleaning Router Bits by MLCS

For a perfect smooth bottom cut - every time!

See Options Below

Shop with Confidence. Our GUARANTEE.

Great for stair treads

2-flute, carbide-tipped. Often used in stair tread routing. Overlapped carbide produces a smooth flat bottom cut. Will level the bottom of a dado cut on all popular wobble blades.

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Item # Price    Qty
3/4" 3/8" 2-1/4" 1/2" #7940
(Old/Eagle P11-1702)
1" 3/8" 2-1/4" 1/2" #7941
(Old/Eagle P11-1705)
1-1/2" 1/2" 2-5/8" 1/2" #7942
(Old/Eagle P11-1706)
2" 1/2" 2-1/2" 1/2" #7943
(Old/Eagle P11-1707)

You May Also Like

Sign up for our eNewsletter