Mica File Router Bits by MLCS

Never File a Laminate Top Again!

See Options Below

Shop with Confidence. Our GUARANTEE.

2 flute, carbide tipped with totally enclosed ball bearing guides.

  • Great for laminate counter tops.

#6515 features a combination angled flush trimmer with a slight beveled edge. Eliminates the need for hand filing.

#6519 features non-stick Teflon cased square bearing that stops spinning when it touches the piece, eliminating burning.

Product Instructions:

Mica File Router Bits

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Image (D)
Large Diameter
Cutting Length
Overall Length Shank Size Item # Price    Qty
1/2" 3/8" 1-3/4" 1/4" #6515
(Old/Eagle P12-1781)
3/4" 3/8" 2-7/8" 1/4" #6519
(Old/Eagle P12-1783)
Sign up for our eNewsletter