Round Nose Router Bits by MLCS

Will plunge cut in hard or soft woods

See Options Below

Shop with Confidence. Our GUARANTEE.

2 flute, carbide tipped (except 6441 and 6442, single flute).

  • Will plunge cut in soft or hard woods as well as composition materials.
  • Perfect for reeding, fluting, veining, grooving and general ornamentation.
  • Add a round bottom detail to any project.
  • #6441 and #6442 are SINGLE Flute.

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

(R)
Radius
(D)
Large Diameter
(L)
Cutting Length
Overall Length Shank Size Item # Price    Qty
1/16" 1/8" 5/16" 1-3/4" 1/4" #6441
(Old/Eagle P13-2001)
$9.00
3/32" 3/16" 5/16" 1-3/4" 1/4" #6442
(Old/Eagle P13-2002)
$9.00
1/8" 1/4" 5/16" 2-1/8" 1/4" #6443
(Old/Eagle P13-2006)
$11.00
3/16" 3/8" 1/2" 1-3/4" 1/4" #6444
(Old/Eagle P13-2004)
$12.00
1/4" 1/2" 5/8" 2-3/8" 1/4" #6445
(Old/Eagle P13-2007)
$13.00
3/16" 3/8" 3/4" 2-3/4" 1/2" #8744
(Old/Eagle P13-2005)
$13.00
1/4" 1/2" 1" 2-1/2" 1/2" #8745
(Old/Eagle P13-2008)
$14.00
Backordered until 9/30/2021. Reserve Now!
5/16" 5/8" 1" 2-5/8" 1/2" #8746
(Old/Eagle P13-2011)
$15.00
3/8" 3/4" 1-1/4" 2-3/4" 1/2" #8747
(Old/Eagle P13-2014)
$17.00
1/2" 1" 1-1/4" 2-3/4" 1/2" #8748
(Old/Eagle P13-2017)
$20.00

You May Also Like

Sign up for our eNewsletter