V-Groove / Sign Lettering Router Bits by MLCS

The sign maker's secret!
Review star icon Review star icon Review star icon Review star icon Review star icon 5 of 5 Stars (1 review)

See Options Below

Shop with Confidence. Our GUARANTEE.

2 flute, carbide tipped.

  • Excellent for sign carving, lettering, grooving, etc.
  • Plunge cut in soft and hard woods.
  • 90° V-Groove bits are used for cutting full 90° V grooves, 45° chamfers or a 45° angle for an accurate mitre.

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).
Write a Review

1 review
Sharpest Point for a V-bit by ()
Review star icon Review star icon Review star icon Review star icon Review star icon 5 Stars
I bought the P13-2110 just to compare to the big name bits I buy including Eagle. This bit has the sharpest point of any bit I have bought. Great for CNC letter carving of .25" or less. A very stable bit and kept a good edge on some deep plunge operations.

Product Options

Degree D
Large
Dia.
L1
Cutting
Length
L2
Cutting
Length
Overall
Length
Shank
Size
Item # Price    Qty
22° 1/4" 5/16" 5/16" 2-1/2" 1/4" #5420
(Old/Eagle P13-2100)
$9.00
45° 1/4" 5/16" 5/16" 2-1/2" 1/4" #5431
(Old/Eagle P13-2112)
$9.00
90° 1/4" 1/8" 1/4" 1-5/8" 1/4" P13-2102 REG. $11.97
SALE $8.00
90° 1/4" 1/8" 1/4" 2-1/4" 1/4" #5424
(Old/Eagle P13-2122)
$9.00
90° 3/8" 3/16" 3/8" 1-3/4" 1/4" #5425
(Old/Eagle P13-2108)
$10.00
90° 1/2" 1/4" 1/4" 2-3/8" 1/4" #5426
(Old/Eagle P13-2110)
$11.00
60° 1/2" 7/16" 3/16" 2-3/8" 1/4" #5422
(Old/Eagle P13-2125)
$14.00
45° 5/8" 3/4" 3/16" 2-7/16" 1/4" #5421
(Old/Eagle P13-2113)
$16.00
90° 3/4" 3/8" 1/4" 2" 1/4" #5428
(Old/Eagle P13-2117)
$14.00
60° 3/4" - - - 1/4" 5427 $18.00
120° 1-1/4" 3/8" 9/32" 2" 1/4" #5423
(Old/Eagle P13-2132)
$28.00
90° 1/2" 1/4" 1/4" 2" 1/2" #7726
(Old/Eagle P13-2109)
$11.00
60° 1/2" 3/8" 1/4" 2-5/16" 1/2" #7722
(Old/Eagle P13-2107)
$14.00
90° 3/4" 3/8" 1/4" 2-3/16" 1/2" #7728
(Old/Eagle P13-2114)
$14.00
90° 1" 1/2" 1/4" 2-1/4" 1/2" #7729
(Old/Eagle P13-2116)
$20.00
120° 1-1/4" 9/16" 5/16" 2-5/16" 1/2" #7723
(Old/Eagle P13-2133)
$28.00
90° 2" 1" 9/32" 2-7/8" 1/2" #7731
(Old/Eagle P13-2118)
$35.00
Sign up for our eNewsletter