Point Cutting Round Over Router Bits by MLCS

Great for Making Bead Board Panels

See Options Below

Shop with Confidence. Our GUARANTEE.

2 flute, carbide tipped.

  • Make beaded panels for any project by routing side by side grooves.
  • Perfect for carving decorative grooves and edge forming.
  • Create beaded panels and molding.

NOTE:

  • Part numbers ending with B feature top mounted bearing.
  • P13-2309B supplied without collar

Making Beaded Panels Instructions

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

(R)
Radius
(D)
Large
Diameter
(L)
Cutting
Length
Overall
Length
Shank Size Item # Price    Qty
1/16" 1/8" 1/4" 2" 1/4" #6429
(Old/Eagle P13-2307)
$13.00
1/8" 1/4" 3/8" 2" 1/4" #6431
(Old/Eagle P13-2310)
$13.00
3/16" 3/8" 3/8" 1-3/4" 1/4" #6430
(Old/Eagle P13-2309)
$14.50
1/4" 1/2" 3/8" 1-3/4" 1/4" #6432
(Old/Eagle P13-2311)
$16.00
Backordered until 1/5/2022. Reserve Now!
3/8" 3/4" 5/8" 2" 1/4" #6433
(Old/Eagle P13-2312)
$19.00
1/2" 1" - - 1/4" 6434 $22.00
1/8" 1/4" 3/8" 2" 1/2" #8731
(Old/Eagle P13-2308)
$13.00
3/16" 3/8" 3/8" 1-3/4" 1/2" #8730
(Old/Eagle P13-2313)
$14.50
1/4" 1/2" 3/8" 1-3/4" 1/2" #8732
(Old/Eagle P13-2315)
$16.00
3/8" 3/4" 5/8" 2-1/8" 1/2" #8733
(Old/Eagle P13-2314)
$19.00
1/2" 1" 3/4" 2-1/4" 1/2" #8734
(Old/Eagle P13-2316)
$22.00
3/16" 3/8" 3/8" 1-3/4" 1/4" P13-2309B REG. $22.26
SALE $19.80
1/4" 1/2" 3/8" 1-3/4" 1/4" P13-2311B REG. $26.61
SALE $24.80
Backordered until 2/2/2022. Reserve Now!
3/8" 3/4" 5/8" 2" 1/4" P13-2312B REG. $30.16
SALE $28.80
3/8" 3/4" 5/8" 2-1/8" 1/2" P13-2314B REG. $35.24
SALE $32.80
1/2" 1" 3/4" 2-1/4" 1/2" P13-2316B REG. $47.36
SALE $38.80
Sign up for our eNewsletter