We've added OVER 100 New Items for Fall 2018.Shop Now

Point Cutting Plunge Roundover Bits by MLCS

Accent your next project

See Options Below

Shop with Confidence. Our GUARANTEE.

Full Description Below...

Simple adjustments to the cutting depth will give you a variety of eye catching beads, veins, edges and roundovers. Use for making decorative cabinet panel doors and drawer fronts. Great for sign making. Give a bold accent to large furniture pieces. Also available with top mounted bearing for template routing. All bits two flute, carbide tipped.

NOTE:
• Part numbers ending with B feature top mounted bearing.
• P13-2309B supplied without collar

EXTRA SAVINGS! When you buy a 5 Piece Value Set below.
#P19-2301 -1/4" shank includes: 1/16", 1/8", 3/16", 1/4", 3/8" radius
#P19-2302 -1/4 & 1/2" shank includes: 1/16", 1/8", 3/16", 1/4", 3/8" radius


brand - click here
What's the difference?

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

(R)
Radius
(D)
Large
Diameter
(L)
Cutting
Length
Overall
Length
Shank Size Item # Price    Qty
1/16" 1/8" 1/4" 2" 1/4" P13-2307 REG. $15.47
SALE $12.50
1/8" 1/4" 3/8" 2" 1/4" P13-2310 REG. $16.24
SALE $13.00
1/8" 1/4" 3/8" 2" 1/2" P13-2308 REG. $16.96
SALE $13.00
3/16" 3/8" 3/8" 1-3/4" 1/4" P13-2309 REG. $16.96
SALE $14.50
3/16" 3/8" 3/8" 1-3/4" 1/4" P13-2309B REG. $22.26
SALE $19.80
3/16" 3/8" 3/8" 1-3/4" 1/2" P13-2313 REG. $17.67
SALE $14.50
1/4" 1/2" 3/8" 1-3/4" 1/4" P13-2311 REG. $17.81
SALE $16.00
1/4" 1/2" 3/8" 1-3/4" 1/4" P13-2311B REG. $26.61
SALE $24.80
1/4" 1/2" 3/8" 1-3/4" 1/2" P13-2315 REG. $18.98
SALE $16.00
3/8" 3/4" 5/8" 2" 1/4" P13-2312 REG. $20.36
SALE $19.00
3/8" 3/4" 5/8" 2" 1/4" P13-2312B REG. $30.16
SALE $28.80
3/8" 3/4" 5/8" 2-1/8" 1/2" P13-2314 REG. $21.24
SALE $19.00
3/8" 3/4" 5/8" 2-1/8" 1/2" P13-2314B REG. $35.24
SALE $32.80
1/2" 1" 3/4" 2-1/4" 1/2" P13-2316 REG. $30.56
SALE $22.00
1/2" 1" 3/4" 2-1/4" 1/2" P13-2316B REG. $47.36
SALE $38.80
5 Piece Plunge Roundover Set 1/4" Shank P19-2301 REG. $75.00
SALE $69.99
5 Piece Plunge Roundover Set 1/4" & 1/2" Shank P19-2302 REG. $75.00
SALE $69.99
Sign up for our eNewsletter