T-Slot Router Bits by MLCS

Make horizontal t-slots.

See Options Below

Shop with Confidence. Our GUARANTEE.

2 flute carbide tipped.

  • Make horizontal T-slots for accepting the head of a bolt and a washer, perfect for sliding fixtures and jigs.
  • Great for making T-slots for hanging brackets in wall panels for commercial display units, at a fraction of the cost of pre-cut panels.

Product Instructions:

T-Slot Router Bits

Router Safety Chart - Suggested Speeds:

Bit Diameter Max Speed
up to 1" 24000 RPM
1-1/16" to 2" 18000 RPM
2-1/16" to 2-1/2" 16000 RPM
2-9/16" to 3" 14500 RPM
over 3" 12000 RPM

Router Safety Tips:

  • Always wear eye and ear protection.
  • Always use properly sharpened bits.
  • Never use bits that are dull or damaged.
  • Shank must be completely inserted into collet and then backed-off approximately 1/16".
  • Don't "bottom-out" bit in collet.
  • Never partially insert bit into collet. Minimum 1" of shank needs to be in collet.
  • Tighten bit securely and recheck periodically for possible slippage or "run-out" due to wear.
  • Keep collet clean and replace if worn.
  • Never start the router with the bit in contact with wood.
  • Always feed your work or router in the proper direction against the bit rotation.
  • Don't force feed the bit or overload your router, Feed at a constant moving speed to avoid burning the wood.
  • Do not face tool's discharge when operating.
  • Always unplug router when changing bits or making adjustments.
  • Use a router table and fence whenever possible.
  • Make sure your work piece is properly secured and use push blocks, sticks and featherboards whenever possible.
  • Keep all your bits, bearings and assemblies clean, lubricated, and securely fastened. To avoid damage, store them properly in a pouch, box or tray.
  • The bigger the bit, the lower RPM recommended (see chart).

Product Options

Large Dia Small Dia Height of T-Cut Carbide Height Shank Size Item # Price    Qty
3/8" 1/4" 3/16" 1/2" 1/4" 6331 $8.00
Backordered until 2/11/2022. Reserve Now!
1/2" 1/4" 3/16" 1/2" 1/4" 6332 $9.00
3/4" 3/8" 1/8" 5/8" 1/4" #6333
(Old/Eagle P13-2405)
$12.00
3/4" 3/8" 1/4" 3/4" 1/4" #6334
(Old/Eagle P13-2406)
$17.00
3/8" 1/4" 3/16" 1/2" 1/2" 8631 $9.00
Backordered until 2/11/2022. Reserve Now!
1/2" 1/4" 3/16" 1/2" 1/2" 8632 $9.50
Backordered until 2/28/2022. Reserve Now!
1" 3/8" 3/8" 7/8" 1/2" #8637
(Old/Eagle P13-2407)
$18.00
Sign up for our eNewsletter